Polypropylene (PP) foams have become essential items due to their excellent properties. Nevertheless, obtaining net-shaped PP foams with medium relative densities is a complicated issue. In this article, two processes able to produce moulded PP foams in this density range are presented. One of them is based on a modification of the pressure quench foaming method and therefore uses a physical blowing agent (CO2). The second one is the improved compression moulding technique which uses a chemical blowing agent (azodicarbonamide). PP foams with relative densities in the range between 0.25 and 0.6 and cylindrical shape were prepared using these foaming techniques. A common PP grade (instead a highly branched one) was used to obtain the samples, showing, that by combining the appropriate foaming technique, the adequate moulds, suitable blowing agent and proper foaming parameters, net-shaped PP foams with excellent properties can be produced starting from a conventional PP grade. Samples were characterized by analyzing their cellular structure and their mechanical properties. Results have showed that depending on the chosen foaming route isotropic or anisotropic structures with cell sizes ranging from 40 to 350 μm and open cell content in the range between 0 and 65% can be obtained. Moreover, mechanical properties are highly influenced by the production route and chemical composition of the foams. For instance, the stiffer materials at relative densities higher than 0.4 are the ones produced using the chemical blowing agent while at relative densities lower than 0.4 are the ones produced using the physical blowing agent.
This is a preview of subscription content, log in to check access.
Buy single article
Instant access to the full article PDF.
Price includes VAT for USA
Subscribe to journal
Immediate online access to all issues from 2019. Subscription will auto renew annually.
This is the net price. Taxes to be calculated in checkout.
Rodríguez-Pérez MA (2005) Adv Polym Sci 184:1
Eaves D (2004) Handbook of polymeric foams. Rapra Technology, Shawbury
Klempner D, Sendijarevic V (2004) Handbook of polymeric foams and foam technology, 2nd edn. Hanser Publishers, Munich
Naguib HE, Park CB, Song SW (2005) Ind Eng Chem Res 44:6685
Doroudiani S, Park CB, Kortschot MT (1996) Polym Eng Sci 36:2645
Naguib HE, Park CB, Panzer U (2002) Polym Eng Sci 42:1481
Naguib HE, Park CB, Reichelt N (2004) J Appl Polym Sci 91:2661
Xu ZM, Jian XL, Liu T, Hu GH, Zhao L, Zhu ZN, Yuan WK (2007) J Supercrit Fluid 41:299
Park CB, Cheung LK (1997) Polym Eng Sci 37:1
Zheng WG, Lee YH, Park CB (2010) J Appl Polym Sci 117:2972
Zhai W, Kuboki T, Wang L, Park CB, Lee EK, Naguib HE (2010) Ind Eng Chem Res 49:9834
Antunes M, Velasco JI, Realinho V, Solorzano E (2009) Polym Eng Sci 49:2400
Bhattacharya S, Gupta RK, Jollands M, Bhattacharya SN (2009) Polym Eng Sci 49:2070
Jian XL, Liu T, Xu ZM, Zhao L, Hu GH, Yuan WK (2009) J Supercrit Fluid 48:167
Zhai W, Wang H, Yu J, Dong JY, He J (2008) Polymer 49:3146
Osswald TA, Turn LS, Gramman PJ (2002) Injection moulding handbook. Hanser Publishers, Munich
Lee JWS, Wang J, Yoon JD, Park CB (2008) Ind Eng Chem Res 47:9457
Touleshkow N, Djoumaliisky S, Kotzev G (1989) Polym Degrad Stab 24:327
Guo MC, Heuzev MC, Carreau PJ (2007) Polym Eng Sci 47:1070
Okamoto KT (2003) Microcellular processing. Hanser Publishers, Munich
Rodríguez-Pérez MA, Lobos J, Pérez-Muñoz CA, de Saja JA (2008) Cell Polym 27:327
Rodríguez-Pérez MA, Lobos J, Pérez-Muñoz CA, de Saja JA (2009) J Cell Plast 45:389
Rodríguez-Pérez MA, Simoes RD, Roman-Lorza S, Alvarez-Lainez M, Montoya-Mesa C, Constantino CJL, de Saja JA (2011) Polym Eng Sci. doi:10.1002/pen.22046
Pinto J, Rodríguez-Pérez MA, de Saja JA (2009) In: XI Reunión del Grupo Especializado de Polímeros (GEP), 10–14 September 2009, Valladolid, Spain
Gibson LJ, Ashby MF (1997) Cellular solids: structure and properties. Cambridge University Press, Cambridge
Rodríguez-Pérez MA, Alonso O, Duijsens A, de Saja JA (1998) J Appl Polym Sci 36:2587
Gong W, Gao J, Jiang M, He L, Yu J, Zhu J (2011) J Appl Polym Sci 122:2907
Financial assistance from Spanish Ministry of Science and Education and Feder Program (MAT 2009-14001 CO2-01) as well as Innocash Project (INC-0193) and ESA Project AO-99-075 “Advanced foams unless Microgravity” are gratefully acknowledged.
About this article
Cite this article
Saiz-Arroyo, C., de Saja, J.A., Velasco, J.I. et al. Moulded polypropylene foams produced using chemical or physical blowing agents: structure–properties relationship. J Mater Sci 47, 5680–5692 (2012). https://doi.org/10.1007/s10853-012-6357-7
- Injection Moulding
- Expansion Ratio
- Anisotropy Ratio
- Cell Size Distribution