Abstract
In this study, effect of geometrical confinement on the deformation behavior of Zr57.5Cu11.2Ni13.8Al17.5 bulk metallic glass (BMG) was investigated. For this purpose flat top conical samples with different semi-vertex angles (α) were prepared for quasi-static compression tests. It was observed that as the geometry of the sample is slightly changed from cylindrical shape (for which α = 0°) to conical shape (for which α > 0°), a brittle BMG sample tends to deform in a ductile manner due to the geometrical constraint-induced complex multi-axial stress distribution in the sample. In brittle Zr57.5Cu11.2Ni13.8Al17.5 specimen with α = 5°, plastic deformation of about 4% was observed due to the formation of extensive intersecting shear bands.
Similar content being viewed by others
References
Greer AL (1995) Science 267:1947
Inoue A (2000) Acta Mater 48:279
Tariq NH, Iqbal M, Shaikh MA, Akhter JI, Ahmad M, Ali G, Hu ZQ (2008) J Alloys Compd 460:258
Johnson WL (1999) Mater Res Bull 24:42
Tariq NH, Hasan BA, Akhter JI, Shaikh MA (2009) J Alloys Compd 477:L8
Shamimi Nouri A, Gu XJ, Poon SJ, Shiflet GJ, Lewandowski JJ (2008) Philos Mag Lett 88:853
Sunny G, Lewandowski JJ, Prakash V (2007) J Mater Res 22:389
Lewandowski JJ, Shazly M, Nouri AS (2006) Scr Metall 54:337
Lewandowski JJ, Wang WH, Greer AL (2005) Philos Mag Lett 85:77
Gu XJ, Poon SJ, Shiflet GJ, Lewandowski JJ (2010) Acta Metall 58:1708
Sunny G, Yuan F, Prakash V, Lewandowski JJ (2009) Exp Mech 49:479
He L, Zhong MB, Han ZH, Zhao Q, Jiang F, Sun J (2008) Mater Sci Eng A 496:285
Lewandowski JJ, Lowhaphandu P (2002) Philos Mag A 82:3427
Bruck HA, Christman T, Rosakis AJ, Johnson WL (1994) Scr Metall Mater 30:429
Bei H, Xie S, George EP (2006) Phys Rev Lett 96:105503
Lu J, Ravichandran G (2003) J Mater Res 18:2039
Zhang ZF, Zhang H, Pan XF, Das J, Eckert J (2005) Philos Mag Lett 85:513
Jiang WH, Fan GJ, Choo H, Liaw PK (2006) Mater Lett 60:3537
Xie S, George EP (2008) Intermetallics 16:485
Wu WF, Zhang CY, Zhang YW, Zeng KY, Li Y (2008) Intermetallics 16:1190
Yao KF, Zhang CQ (2007) Appl Phys Lett 90:061901
Tariq NH, Hasan BA, Akhter JI, Ali F (2009) J Alloys Compd 469:179
Spaepen F (1977) Acta Metall 25:407
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tariq, N.H., Akhter, J.I. & Hasan, B.A. Effect of sample geometry on the deformation behavior of Zr-based bulk metallic glass. J Mater Sci 45, 6170–6173 (2010). https://doi.org/10.1007/s10853-010-4707-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-010-4707-x