Abstract
Glass ionomer cement (GIC) has been successfully used in dental field for more than 40 years. Despite numerous advantages of GIC, low bond strength and slow setting rate limited conventional GICs for use only at low stress-bearing areas. To improve bond strength to tooth, two kinds of cyanoacrylates such as ethyl 2-cyanoacrylate (EC) and allyl 2-cyanoacrylate (AC) were added in a commercial GIC. Changes in setting time of cyanoacrylate-modified GICs (CMGICs) according to the concentration of cyanoacrylates and/or p-toluene sulfonic acid (TSA) was investigated using a rheometer. Shear bond strength to human dentin was measured. Biocompatibility was determined by the viability of fibroblasts. Optimal concentrations for EC and TSA were 5–10% of the GIC powder and 30% of the GIC liquid, respectively. EC-based CMGIC showed twofold increase of initial bond strength compared with conventional GIC. Also, AC-based CMGIC showed three times higher bond strength and similar biocompatibility compared with the GIC. Therefore, CMGIC materials can be widely applied in dental adhesive restoration field because they showed improved bond strength and proper setting time.
Similar content being viewed by others
References
Wilson AD, Kent BE (1972) Br Dent J 132:133
Dahl BL, Tronstad L (1976) J Oral Rehabil 3:19
Crisp S, Ferner AJ, Lewis BG, Wilson AD (1975) J Dent 3:125
Young AM, Sherpa A, Pearson G, Schottlander B, Waters DN (2000) Biomaterials 21:1971
Wilson AD, Nicholson JW (1993) Acid–base cements: their biomedical and industrial applications. Cambridge University Press, Cambridge
Katsuyama S, Ishikawa T, Fuji B (1993) Glass ionomer dental cement: the materials and their clinical use. Ishiyaku EuroAmerica, Saint Louis
Anusavice KJ (2003) Philips science of dental materials, 11th edn. Philadelphia, Saunders
Smith DC (1999) Oper Dent 5:177
Davidson CL (1999) Advances in glass ionomer cements. Quintessence Publishing Co., Chicago, USA
Mount GF (1994) An atlas of glass ionomer cements: a clinician’s guide, 2nd edn. Martin Dunitz, London
McLean JW, Nicholson JW, Wilson AD (1994) Quintessence Int 25:587
Tanumiharja M, Burrow MF, Tyas MJ (2000) J Dent 28:361
Rusz JE, Antonucci JM, Eichmiller F, Anderson MH (1992) Dent Mater 8:31
Han MG, Kim SH, Liu SX (2008) Polym Degrad Stab 93:1243
Chouinard F, Buczkowski S, Lenaerts V (1994) Pharm Res 11:869
Newman SM, Valadez SK, Hembreer JH (1978) J Prosthet Dent 40:422
Wiebelt FJ, Duncanson MG, Stratton RJ (1982) J Prosthet Dent 47:603
Bakland T, Baum L (1973) J Ga Dent Assoc 47:13
Dilts W, Collard EW, Duncanson MG (1973) IADR Prog Abstr 53:47
Trabert RC, Caputo AA (1973) IADR Prog Abstr 53:50
Tomlinson SK, Ghita OR, Hooper RM, Evans KE (2007) Dent Mater 23:799
Hile LM, Linklater DR (2006) Ann Emerg Med 47:424
Jacobsen EL, Shugars KA (1990) J Endod 16:516
Guzm′an-Armstrong S, Mitchell RJ (2002) J Dent 30:113
Beech DR (1972) J Dent Res 51:1438
Beech DR, Kurer HG (1974) IADR Prog Abstr 54:1356
Akama Y, Kikuchi T, Nakamura Y, Noguchi H (1989) Shika Zairyo Kikai 8:706
Pritykin LM, Lakiza OV, Niazashvili GA, Karmazin VB, Klimentova NV, Mager KA, Tutorskii IA, Vakula VL (1991) Polym Sci USSR 33:930
Fink JK (2005) Cyanoacrylates, reactive polymers fundamentals and applications. Elsevier, Philadelphia
El-Askary FS, Nassif MS, Fawzy AS (2008) J Adhes Dent 10:471
ISO (2003) ISO/TS 11405
de Souza Costa CA, Hebling J, Garcia-Godoy F, Hanks CT (2003) Biomaterials 24:3853
Berridge MV, Herst PM, Tan AS (2005) Biotechnol Annu Rev 11:127
Beech P, Solomon A, Bernier R (1985) Dent Mater 1:154
Walls AW (1986) J Dent 14:230
Shen C (2003) Glass ionomer cement in Dental cement. Phillips’ Science of Dental Materials, 11th edn. Elsevier, Philadelphia
Davidson CL, Feilzer AJ (1997) J Dent 25:435
Braunecker WA, Matyjaszewski K (2007) Prog Polym Sci 32:93
Culbertson BM (2001) Prog Polym Sci 26:577
Syrek A (2006) J Dent 34:615
DeRenzis FA, Aleo JJ (1970) Oral Surg Oral Med Oral Pathol 30:803
Colón I, Richoll SM (2005) J Pharm Biomed Anal 39:477
Doherty PJ (1991) Clin Mater 7:335
Costa CADS, Hebling J, Garcia-Godoy F, Hanks CT (2003) Biomaterials 24:3853
Sasanaluckit P, Albustany KR, Doherty PJ, Williams DF (1993) Biomaterials 14:906
Wilson AD, GroRman DR, Kuhn AT (1985) Biomaterials 6:431
Swartz ML, Phillips RW, Clark HE (1984) J Dent Res 63:158
Nicholson JW, Czarnecka B (2008) Dent Mater 24:1702
Beriat NC, Nalbant D (2009) Eur J Dent 3:267
Acknowledgement
This work was supported by grant from National Core Research Center for Nano Medical Technology, Yonsei University (Grant R15-2004-024-00000-0).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lim, J.I., Lim, KJ., Lim, HN. et al. Bond strength of experimental cyanoacrylate-modified dental glass ionomer cements. J Mater Sci 45, 5211–5217 (2010). https://doi.org/10.1007/s10853-010-4560-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-010-4560-y