Abstract
Laser brazing is an effective process for joining of steel products widely applied in automobile industry on exposed parts, especially on two following targeted applications: roofs and hatchbacks. The obtaining of good quality joints requires an adequate understanding of interaction phenomena of the brazing filler with the steel surface. This study concerns the investigation of wetting and interfacial reactivity in Cu–Si brazing alloy/Zn-coated steel systems in order to identify how the coating influences the wettability and, consequently, the brazability of steel products. The wetting experiments are performed on hot-dip-galvanized and electro-galvanized coatings, as well as on bare steel. The morphology and chemistry of interfacial reaction products are characterized by SEM-FEG and X-microanalysis.
Similar content being viewed by others
References
Jäckel T (2006) European automotive laser applications congress. Bad Nauheim/Frankfurt, Germany
Manthey S, Bayer V (2006) European automotive laser applications congress. Bad Nauheim/Frankfurt, Germany
Hornig H, Vasold H (2007) Joining in automotive engineering congress. Bad Nauheim/Frankfurt, Germany
Hover J, Müller G (2008) European automotive laser applications congress. Bad Nauheim/Frankfurt, Germany
Eustathopoulos N, Nicholas M, Drevet B (1999) Wettability at high temperatures. Pergamon Materials Series, 3rd edn. Pergamon, Oxford, pp 177–214
Zaïdi M, Giorgi ML, Guillot JB, Goodwin F (2008) Mater Sci Eng A 495:90
Protsenko P, Terlain A, Traskine V, Eustathopoulos N (2001) Scr Mater 45:1439
Protsenko P, Eustathopoulos N (2005) J Mater Sci 40:2383. doi:10.1007/s10853-005-1963-2
Coudurier L, Pique D, Eustathopoulos N (1987) J Chim Phys 84(2):205
Ebrill N (1999) Ph.D. thesis, University of Newcastle, Australia
Popel SI, Zakharova TV, Pavlov VV (1975) Fiz-Khim Issled Metall Protsessov 3:108
Tarasova AA, Kirdyashkina LP (1976) In: Eremenko VN (ed) Fiz. Khim. Granits Razdela Kontaktiruyushchikh Faz. Naukova Dumka, Kiev, pp 117–122
Massalski TB (1990) Binary alloy phase diagrams. ASM International, Metals Park, OH
Cornu MJ, Loison D, Steer S (1998) Note interne IRSID SCR 98 N°222
Cornu MJ (2004) Internal report, Arcelor
Tanner LH (1979) Appl Phys 12(9):1473
Marder A (2000) Prog Mater Sci 45:191
Agudo L, Eyidi D, Schmaranzer CH, Arenholz E, Jank N, Bruckner J, Pyzalla AR (2007) J Mater Sci 42:4205. doi:10.1007/s10853-006-0644-0
Bailly N (2008) Advanced laser applications conference (ALAC), Minneapolis/Minnesota, USA
Bailly N, Cretteur L, Koltsov A (2009) Weld Cut 8(3):154
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Koltsov, A., Bailly, N. & Cretteur, L. Wetting and laser brazing of Zn-coated steel products by Cu–Si filler metal. J Mater Sci 45, 2118–2125 (2010). https://doi.org/10.1007/s10853-009-3949-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-009-3949-y