References
Padture NP, Gell M, Jordan EH (2002) Science 296:280
Bunker RS (2005) ASME J Heat Transf 127:441
Bunker RS (2007) ASME J Turbomach 129:193
McNally CA, Folkes J, Pashby IR (2004) Mater Sci Technol 20:805
Dahotre NB, Harimkar SP (2008) Laser fabrication and machining of materials. Springer
Dubey AK, Yadava V (2008) Int J Mach Tool Manuf 48:609
Pandey ND, Shan HS, Mohandas T (2006) Mater Manuf Process 21:383
Bandyopadhyay S, Sarin Sundar JK, Sundararajan G, Joshi SV (2002) J Mater Process Technol 127:83
Steen WM (1991) Laser materials processing. Springer
Lemmen HJK, Sudmeijer KJ, Richardson IM, van der Zwaag S (2007) J Mater Sci 42:5286. doi:https://doi.org/10.1007/s10853-006-0168-7
Mumtaz KA, Hopkinson N (2007) J Mater Sci 42:7647. doi:https://doi.org/10.1007/s10853-007-1661-3
Xu PQ, Gong HY, Xu GX et al (2008) J Mater Sci 43:1559. doi:https://doi.org/10.1007/s10853-007-2339-6
Feng Q, Picard YN, Liu H, Yalisove SM, Mourou G, Pollock TM (2005) Scr Mater 53:511
Feng Q, Picard YN, McDonald JP, Van Rompay PA, Yalisove SM, Pollock TM (2006) Mater Sci Eng A 430:203
Thawari G, Sarin Sundar JK, Sundararajan G, Joshi SV (2005) J Mater Process Technol 170:229
Sezer HK, Li L, Schmidt M, Pinkerton AJ, Anderson B, Williams P (2006) Int J Mach Tool Manuf 46:1972
Pandey ND, Shan HS, Bharti A (2006) Int J Adv Manuf Technol 28:863
Bright R, Jacobs P, Aindow M, Marcus HL (2007) Proceedings of ICALEO 2007, p 1201
Garofano JKM, Marcus HL, Aindow M (2008) Microsc Microanal 14(S2):558
Wusatowska-Sarnek AM, Ghosh G, Olson GB, Blackburn MJ, Aindow M (2003) J Mater Res 18:2653
Wusatowska-Sarnek AM, Blackburn MJ, Aindow M (2003) Mater Sci Eng A 360:390
Acknowledgements
The authors would like to thank Robin Bright (University of Connecticut) and Dr. Paul Denney of the Connecticut Center for Advanced Technology (CCAT) for helpful discussions, Robert Wright of CCAT for assistance with producing the laser-drilled samples, and Pal O. Pedersen of FEI Company and Dr. Kai Song of Lehigh University for assistance with FIB sectioning. This material is based on research sponsored by CCAT’s National Center for Aerospace Leadership through Grant/Cooperative Agreement Number FA9550-06-1-0397 with the Air Force Office of Scientific Research. The U.S. government is authorized to reproduce and distribute reprints for Governmental purposes notwithstanding any copyright notation thereon. The views and conclusions contained herein are those of the authors and should not be interpreted as necessarily representing the official policies or endorsements, either expressed or implied, of the Air Force Research Laboratory or the U.S. government.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Garofano, J.K.M., Marcus, H.L. & Aindow, M. Characterization of microstructural effects in a percussion laser-drilled powder metallurgy Ni-based superalloy. J Mater Sci 44, 680–684 (2009). https://doi.org/10.1007/s10853-008-3177-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-008-3177-x