Abstract
Common to metals deformed to high strains is a very fine microstructure, high strength, and limited ductility. Structure and property optimization by annealing after deformation must, therefore, be explored. In the present study, commercial purity aluminum has been annealed after cold rolling to ultrahigh strains up to \( \varepsilon _{{{\text{vM}}}} = 6.2 \) and annealing processes have been studied in terms of recovery and conventional recrystallization. These processes have been analyzed by isochronal and isothermal annealing in the temperature range 140–420 °C. It has been found that the recrystallization temperature is a little affected by the rolling strain, whereas the rate of recovery and the temperature range over which recovery takes place increase significantly as the strain is increased. These observations are discussed as to how they can guide studies of nanostructured metals processed by plastic deformation.
Similar content being viewed by others
References
Godfrey A, Cao WQ, Hansen N, Liu Q (2005) Metall Trans A 36A:2371. doi:https://doi.org/10.1007/s11661-005-0109-0
Cao WQ, Godfrey A, Hansen N, Liu Q (2008) Metall Trans A (in press)
Knudsen T, Cao WQ, Godfrey A, Liu Q, Hansen N (2008) Metall Mater Trans A 39A:430. doi:https://doi.org/10.1007/s11661-007-9421-1
Schamp J, Verlinden B, VanHumbeeck J (1996) Scripta Mater 34:1667. doi:https://doi.org/10.1016/1359-6462(96)00034-6
Vandermeer RA, Juul Jensen D (2001) Acta Mater 49:2083. doi:https://doi.org/10.1016/S1359-6454(01)00074-X
Wu GL, Juul Jensen D (2005) Mat Sci Tech Paris 21:1407. doi:https://doi.org/10.1179/174328405X71602
Xing Q, Huang X, Hansen N (2006) Metall Mater Trans A 37A:1311. doi:https://doi.org/10.1007/s11661-006-1083-x
Huang X, Xing Q, Juul Jensen D, Hansen N (2006) Mater Sci Forum 519–521:79
Hansen N, Huang X, Godfrey A (2007) Mater Sci Forum 558–559:201
Mishin OV, Juul Jensen D, Hansen N (2003) Mater Sci Eng A 342:320. doi:https://doi.org/10.1016/S0921-5093(02)00311-8
Hansen N (2007) Mater Sci Forum 550:169
Oscarsson A, Ekström H-E, Hutchinson WB (1993) Mater Sci Forum 113–115:177
Jazaeri H, Humphreys FJ (2004) Acta Mater 52:3251. doi:https://doi.org/10.1016/j.actamat.2004.03.031
Vandermeer RA, Hansen N (2008) Acta Mater (in press)
Furu T, Orsund R, Nes E (1995) Acta Metall Mater 43:2209. doi:https://doi.org/10.1016/0956-7151(94)00410-2
Kamikawa N, Huang X, Hansen N (2008) This conference
Jones AR, Ralph B, Hansen N (1979) Proc R Soc A 368:345. doi:https://doi.org/10.1098/rspa.1979.0134
Tsuji N, Ho Y, Koizumi Y, Minamino Y Saito Y (2002) In: Zhu YT et al (eds) The minerals, metals and materials society, p 389
Huang X (2008) J Mater Sci (in press). doi:https://doi.org/10.1007/s10853-008-2873-x
Acknowledgements
The authors acknowledge support form Danish National Research Foundation to the Center for Fundamental Research: Metal Structures in Four Dimensions. The authors also acknowledge valuable discussions with D. Juul Jensen and R.A. Vandermeer. The authors also thank Ms. Eva Nielsen for assistance with preparation of the manuscript.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hansen, N., Huang, X., Møller, M.G. et al. Thermal stability of aluminum cold rolled to large strain. J Mater Sci 43, 6254–6259 (2008). https://doi.org/10.1007/s10853-008-2874-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-008-2874-9