Abstract
Theoretical micromechanical analysis of bridged crack development at chevron-notch tip of three-point bend specimens has been applied to determine the crack resistance curve for a composite made of a glass matrix reinforced by continuous Nicalon® fibres. Fracture toughness (KIC) values were determined using the chevron-notch technique at room temperature. The theoretical predictions were based on micromechanical analysis exploiting weight functions. Detailed FEM analysis using the ANSYS package was applied to determine numerically the weight functions for orthotropic materials. Appropriate bridging models for the theoretical prediction of the R-curve behaviour typical of the investigated composite were applied together with the weight functions. Experimental observations confirmed the theoretical calculations.
Similar content being viewed by others
References
Chawla KK (1993) Ceramic matrix composites. Chapman and Hall, London
Boccaccini AR, Rawlings RD (2002) Glass Technol 43C:191
Kim HS, Yong JA, Rawlings RD et al (1991) Mater Sci Tech Ser 7:155
Rawlings RD (2001) Brittleness—a tough problem. In: Pashley DW (ed) Imperial College inaugural lectures in materials science and materials engineering. Imperial College Press, London, pp 153–197, ISBN: 1-8609-4106-0
Akatsu T, Yasuda E, Sakai M (1996) Fract Mech 11:245
Thouless MD, Evans AG (1988) Acta Metall 36:517
Dlouhy I, Boccaccini AR (2001) Scripta Materialia 44:531
Boccaccini AR, Rawlings RD, Dlouhy I (2003) Mat Sci Eng A Struct 347:102
Bluhm JI (1975) Eng Fract Mech 7:593
Fett T, Munz D, Seidel J, Stech M, Rödel J (1996) J Am Ceram Soc 79:1189
Sarrafi-Nour GR, Coyle TW, Fett T (1998) Eng Fract Mech 59:439
Kotoul M, Vyslouzil T, Dlouhy I (2005) In: Aliabadi MH et al (eds) Proceedings of advances in fracture and damage mechanics IV. EC Ltd, UK, pp 217
Kotoul M, Vyslouzil T, Boccaccini AR, Dlouhy I Theoretical and experimental study of crack growth in glass matrix composite reinforced by long SiC fibres, Theoretical and applied fracture mechanics. doi:https://doi.org/10.1016/j.tafmec.2007.11.001
Pannhorst W et al (1990) Ceram Eng Sci Proc 11:947
Dlouhy I, Reinisch M, Boccaccini AR (2002) Fracture toughness and work of fracture of SiC fibre reinforced glass matrix composite, Fracture mechanics of ceramics, crack/microstructure interaction, R-curve behaviour. Kluwer, pp 203
Dlouhy I, Holzmann M, Man J, Valka L (1994) Metall Mater 32:3
Budiansky B, Cui YL (1994) J Mech Phys Solids 42:l
Tada H, Paris P, Irwin GR (1985) The stress analysis of cracks handbook. Del Research, St Louis
Sih GC, Paris PC, Irwin GR (1965) Int J Fract Mech 1:189
Boccaccini AR, Kern H, Dlouhy I (2001) Mater Sci Eng A308:111
Dlouhý I, Chlup Z (2005) Key Eng Mater 290:167
Kastritseas C, Smith PA, Yeomans JA (2005) Comp Sci Technol 65:1880
Chiang YCh (2001) Comp Sci Technol 61:1743
Brennan JJ, Prewo KM (1982) J Mater Sci 17:2371.
Acknowledgements
The research was supported by the Czech Science Foundation under grant numbers 106/05/0495 and 106/06/0724 is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dlouhy, I., Kotoul, M., Vyslouzil, T. et al. Crack resistance curve in glass matrix composite reinforced by long Nicalon® fibres. J Mater Sci 43, 4022–4030 (2008). https://doi.org/10.1007/s10853-007-2317-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-007-2317-z