A Rosen-type piezoelectric transformer employing lead-free K0.5Na0.5NbO3 ceramics
- 292 Downloads
Lead-free K0.5Na0.5NbO3–K5.4Cu1.3Ta10O29–MnO2 (KNN–KCT–Mn) ceramics have been prepared by a conventional ceramic sintering technique. The ceramics show excellent piezoelectric properties for application in power devices, and the optimum properties measured are as follows: piezoelectric constant d 33 = 90 pC/N, planar electromechanical coupling factor k p = 0.40, mechanical quality factor Q m = 1900, remanent polarization P r = 11.8 μC/cm2, coercive field E c = 0.85 kV/mm. A Rosen-type piezoelectric transformer with a dimension of 21 mm × 6 mm × 1.2 mm was fabricated using the KNN–KCT–Mn ceramics. Properties of the piezoelectric transformer operating in the first and second modes have been characterized. For the first mode, the transformer has a maximum output power of 0.7 W with a temperature rise of 14 °C. For the second mode, the maximum output power of the transformer is 1.8 W with a temperature rise of 33 °C. KNN–KCT–Mn ceramics have shown to be a potential lead-free candidate to be used in high-voltage–low-current devices.
KeywordsLoad Resistance Maximum Output Power Voltage Gain Electromechanical Coupling Factor Mechanical Quality Factor
This work was supported by the Niche Area Project (No. 1-BB95) and the Centre for Smart Materials of The Hong Kong Polytechnic University.
- 1.Rosen A, Fish KA, Rothenberg HC (1958) U.S. Patent No. 2830274, 8 April 1958Google Scholar
- 9.Priya S, Kim H, Ural S, Uchino K (2006) IEEE Trans Ultrason Ferroelectr Freq Control 53:810Google Scholar
- 16.Kimura M, Ando A, Shiratsuyu K, Sakabe Y (2004) Trans Mater Res Soc Jpn 29:1049Google Scholar
- 31.ANSI/IEEE Std. 176–1987 (1987) IEEE standard on piezoelectricity. IEEE, New YorkGoogle Scholar
- 35.Lin D, Kwok KW, Chan HLW, Structure, dielectric, piezoelectric properties of CuO-doped K0.5Na0.5NbO3–BaTiO3 lead-free ceramics. J Appl Phys doi: 10.1063/1.2787164