Abstract
Shearing deformation was applied to AZ31 magnesium alloy sheets by a new concept processing, so-called equal channel angular rolling (ECAR) processing for the development of a different crystal orientation compared with the as-received sheets. The results indicated that deformation behavior was changed obviously and a clear yield phenomenon appeared followed by a clear work hardening state region after ECAR processing. And the elongation-to-failure of the ECARed specimens exhibited over 24%, which was almost twice larger than that of the as-received specimens. All of these can be owing to the modification of the crystal orientation.
Similar content being viewed by others
References
Mukai T, Yamanoi M, Watanabe H, Higashi K (2001) Scripta Mater 45:89
Watanabe H, Takara A, Somekawa H, Mukai T, Higashi K (2005) Scripta Mater 52:449
Yoshida Y, Cisar L, Kamado S, Kojima Y (2003) Mater Trans 44:468
Agnew SR, Horton JA, Lillo TM, Brown DB (2004) Scripta Mater 50:377
Kim WJ, An CW, Kim YS, Hong SI (2002) Scripta Mater 47:39
Couret A, Cailiard D (1989) Phil Mag A59:783
Iwanaga K, Tashiro H, Okamoto H, Shimizu K (2004) J Mater Process Tech 155–156:1313
Perez-Prado MT, Valle JA, Contreras JM, Ruano OA (2004) Scripta Mater 50:661
Valle JA, Prado MT, Ruano OA (2003) Mater Sci Eng A 355:68
Chino Y, Mabuchi M, Kishihara R, Hosokawa H, Yamada Y, Wen C, Shimojima K, Iwasaki H (2002) Mater Trans 43:2554
Watanabe H, Mukai T, Ishikawa K (2004) J Mater Sci 39:1477
Kim SH, You BS, Yim CD, Seo YM (2005) Mater Lett 59:3876
Cheng YQ, Chen ZH, Xia WJ, Fu DF (2005) Chin J Nonferrous Met 15:1369
Kim HK, Kim WJ (2004) Mater Sci Eng A 385:300
Somekawa H, Mukai T (2005) Scripta Mater 53:541
Koike J, Ohyama R, Kobayashi T, Suzuki M, Maruyama K (2003) Mater Trans 44:445
Koike J, Ohyama R (2005) Acta Mater 53:1963
Koike J, Kobayashi T, Mukai T, Watanabe H, Suzuki M, Maruyama K, Higashi K (2003) Acta Mater 51:2055
Agnew SR, Tomé CN, Brown DW, Holden TM, Vogel SC (2003) Scripta Mater 48:1003
Murr LE, Meyers MA, Niou CS, Chen YJ, Pappu S, Kennedy C (1997) Acta Mater 45:157
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cheng, Y.Q., Chen, Z.H. & Xia, W.J. Effect of crystal orientation on the ductility in AZ31 Mg alloy sheets produced by equal channel angular rolling. J Mater Sci 42, 3552–3556 (2007). https://doi.org/10.1007/s10853-007-1559-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-007-1559-0