Abstract
A conceptual nickel–yttria stabilized zirconia (Ni/YSZ) cermet has been prepared by coating YSZ particles with metallic nickel using electroless coating technique. Concentration of nickel was varied between 5 and 60 vol%. Bulk samples were prepared by uniaxial pressing followed by sintering in the temperature range 1,200–1,350 °C with a soaking time of 2–6 h. Thorough investigation on the electrical characteristics, thermal expansion behavior of the samples have been performed as a function of Ni-content in the cermet. Thermal expansion behavior and conductivity measurement results suggest that the samples prepared by this technique are suitable for solid oxide fuel cell (SOFC) anode application at Ni concentration as low as 20 vol%.
Similar content being viewed by others
References
Minh NQ (1993) J Am Ceram Soc 76:563
Badwal SPS, Foger K (1996) Ceram Int 22:257
Minh NQ, Takahashi T (1995) Science and technology of ceramic fuel cells. Elsevier, New York
Dees DE, Claar TD, Easler TE, Fee DC, Mrazek FC (1987) J Electrochem Soc 134:2141
Mizusaki J, Tsuchiya S, Waragai K, Tagawa H, Yoshihidi A, Kuwayama Y (1996) J Am Ceram Soc 79:109
Maggio G, Ielo I, Antonucci V, Giordano N (1991) In: Grosz F, Zegers P, Singhal SC, Yamamoto O (eds) Solid oxide fuel cells II. The Commission of the European Communities, Luxembourg, pp 611–620
Pike GE, Seager CH (1997) J Appl Phys 48:5152
Marinsek M, Zupan K, Macek J (2000) J Power Sources 86:383
Li Y, Xie Y, Gong J, Chen Y, Zhang Z (2001) Mat Sci Eng B 86:119
Aruna ST, Muthuraman M, Patil KC (1998) Solid State Ionics 111:45
Pratihar SK, Das Sharma A, Basu RN, Maiti HS (2004) J Power Sources 129:138
Pratihar SK, Das Sharma A, Maiti HS (2005) Mater Res Bull 40:1936
Pratihar SK, Basu RN, Das Sharma A, Maiti HS (2001) Indian Patent, No. 306/DEL/01 dated. 19.03.01
Radovic M, Lara-Curzio E (2004) Acta Mater 52:5747
Takagi H, Kobayashi S, Shiratori A, Nishida K, Sakabe Y (1991) In: Grosz F, Zegers P, Singhal SC, Yamamoto O (eds) Proceedings of 2nd international symposium on SOFCs. Commission of the European Communities, pp 99
Kerner EH (1956) Proc Phys Soc Lond Ser B 69:808
Ringuede A, Labrincha JA, Frade JR (2001) Solid State Ionics 141–142:549
Mori M, Yamamoto T, Itoh H, Inaba H, Tagawa H (1998) J Electrochem Soc 145:1374
Kagawa Y, Hatta H (1990) Tailoring ceramic composites. Agune-Shofu-sha, Tokyo
Spriggs RM (1961) J Am Ceram Soc 44:628
Banerji A, Rohatgi PK, Reif W (1984) Metall 38:656
Okumura K, Yamamoto Y, Fuki T, Hanyu S, Kubo Y, Esaki Y, Hattori M, Kusunoki A, Takeuchi S (1993) In: Singhal SC, Iwahara H (eds) Proceedings of the third international symposium on solid oxide fuel cells. Electrochemical Society, Pennington, NJ, p 444
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pratihar, S.K., Dassharma, A. & Maiti, H.S. Properties of Ni/YSZ porous cermets prepared by electroless coating technique for SOFC anode application. J Mater Sci 42, 7220–7226 (2007). https://doi.org/10.1007/s10853-007-1497-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-007-1497-x