Abstract
Objects with a complex structure designed to display negative Poisson’s ratio were produced from zirconia ceramic and from metallic nickel. The objects were arrays of repeat units with designed elastic behavior. The technique of microfabrication by coextrusion, based on oxide powders blended with thermoplastics, was used to replicate and miniaturize single 38 mm repeat unit to obtain an array of 64 units, 400 μm in size. The metallic nickel objects were produced fabricating nickel oxide, followed by sintering in a reducing atmosphere to yield dense metallic nickel. Poisson’s ratio of the nickel structure was −0.3.
Similar content being viewed by others
References
Haeri AY, Weidner DJ, Parise JB (1992) Science 257:650
Gibson L, Ashby M (1997) Cellular solids, 2nd edn. Cambridge University Press, Cambridge, p 187
Lakes R (1987) Science 235:1038
Friis E, Lakes R, Park J (1988) J Mater Sci 23:4406
Neale PJ, Alderson KL, Pickles AP, Evans KE (1993) J Mater Sci Lett 12:1529
Caddock BD, Evans KE (1989) J Phys D Appl Phys 22:1877
Caddock BD, Evans KE (1989) J Phys D Appl Phys 22:1883
He CL, Puwei G, Anselm C (1998) Macromolecules 31:3145
Freedman A (1990) J Sound Vibrat 137:209
Nkansah MA, Evans KE, Hutchinson IJ (1993) J Mater Sci 28:2687
Choi JB, Lakes RS (1991) Cell Polymer 10:205
Choi JB, Lakes RS (1992) J Mater Sci 27:4678
Choi JB, Lakes RS (1992) J Mater Sci 27:5372
Fonseca JSO (1997) Design of microstructures of periodic composite materials. PhD Thesis, University of Michigan, Department of Mechanical Engineering and Applied Mechanics
Sigmund O (1995) Mechanics Mater 20:351
Larsen U, Sigmund O, Bouwstra S (1997) J Microelectromechanical Syst 6:99
Van Hoy C, Barda A, Griffith ML, Halloran JW (1998) J Am Ceramic Soc 81:152
Crumm AT, Halloran JW (1998) J Am Ceramic Soc 81:1053
German RM (1984) Powder metallurgy science, 2nd edn. Metal Powder Industries Federation, Princeton, NJ, p 95
Davis JR (ed) (1998) Metals handbook – desk edition, 2nd edn. ASM International, Materials Park, OH, p 609
Frecker M, Ananthasuresh G, Nishiwaki S, Kikuchi N, Kota S (1997) J Mech Des 119:238
Saggere L, Kota S (1999) AIAA J 37:572
Acknowledgement
The authors thank the Office of Naval Research and Dr. Stephen Fishman for support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Crumm, A.T., Halloran, J.W. Negative Poisson’s ratio structures produced from zirconia and nickel using co-extrusion. J Mater Sci 42, 1336–1342 (2007). https://doi.org/10.1007/s10853-006-1209-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-006-1209-y