Abstract
A preliminary study demonstrated that CuS in the acid or basic slurry could be reduced to a certain extent by hydrogen in an autoclave. The reduction mechanisms in the two systems are probably different. The reduction of CuS in the basic slurry of pH 12.0 reached 92% under the hydrothermal conditions, such as 2.5MPa of partial hydrogen pressure, 220 ºC for 3 h and adding 95% of stoichiometric ZnO.
Similar content being viewed by others
References
Biswas AK, Davenport WG (1994) Extractive metallurgy of copper, 3rd edn. Pergamma Press, Oxford
James B, Lancaster T (1998) ALTA 1998. Copper Hydrometallurgy Forum, Queenlend, Australia, October 1998
King JA (1998) ALTA Copper Sulphides Symposium, Brisbane, Australia, October 1998
Evans HA (1999) Randol Copper Hydrometallurgy Roundtable1 '99, Pheonic. October 1999, 93
Berezowsky RM, Trytten L (2002) ALTA Copper-7 Technical Proceedings, Perth, Australia, May 2002
Dreisinger D, March J, Dempsey P (2002) ALTA Copper-7 Technical Proceedings, Perth, Australia, May 2002
Mao MH, Shu DX (1985) Extraction Metallurgy '85, IMM, London, 627
Yu KN, Liang HZ (2004) Mater Lett 58:3045
Liang Y, Dong M (1993) Handbook of thermodynamic data of inorganic materials. Northeastern University Press, Shenyang, p. 612 (in Chinese)
Acknowledgements
This work is supported by the National Natural Science Foundation of China (No. 50174050).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tang, Q., Yu, K., Liang, H. et al. A preliminary study on the preparation of metallic copper by direct hydrogen reduction of CuS slurry. J Mater Sci 42, 6400–6403 (2007). https://doi.org/10.1007/s10853-006-1161-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-006-1161-x