Abstract
The electrical response of an ion-conducting glass to dc biasing was very sensitive to the anode material and anode–glass interface, especially when biasing was made under high electric field at high temperature. The response of the platinum-anoded AgPO3 glass was studied, and was compared with that of the gold-anoded one. Emphasis was laid on the effect of polishing of the glass surface.
Similar content being viewed by others
References
Doi A (2002) Solid State Ionics 147:61
Doi A (2002) Phys Chem Glasses 43:199
Hall AJC, Hayes JG (1958) Austr J Appl Sci 9:207
Milne EL, Gibbs P (1964) J Appl Phys 35:2364
Wallis G (1970) J Am Ceram Soc 53:563
Fauchey S, Guigonis J (1971) L’Indust Ceram 641:493
Carlson DE, Tracy CE (1975) J Appl Phys 46:1575
Kim C, Tomozawa M (1976) J Am Ceram Soc 59:321
Doi A, Ohsugi M (1998) J Appl Phys 84:4198
Doi A, Takano H, Takaki H (1999) J Appl Phys 86:2655
Kirsch R (1993) Glass science and technology, vol 13. Elsevier, Amsterdam, 229
Matushita M, Ohkubo K, Sato R, Komatsu T (1996) Phys Chem Glasses 37:51
Doi A (1998) Solid State Ionics 109:279
Doi A, Morikawa H, Tazawa M (2002) J Mater Sci 37:3867
Doi A, Asakura N (2001) J Mater Sci 36:3897
Shannon RD, Prewitt CT (1969) Acta Crystallogr B25:925
Doi A (2003) Phys Chem Glasses 44:440
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Doi, A. Anode and anodic interface dependent conduction of silver metaphosphate glass. J Mater Sci 42, 1031–1036 (2007). https://doi.org/10.1007/s10853-006-1000-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-006-1000-0