Abstract
To improve electrical and mechanical properties of electrodes for contact welding, a 3 mol% yttria stabilized zirconia (3YSZ) to reinforced copper matrix composite was developed by an in-situ chemical process. The microstructure and properties of the in-situ composite were investigated. The results showed that in-situ nano-scale particles were uniformly dispersed in the copper matrix by dispersed nano-particle and its cluster. Due to their reinforcement, the hardness of the in-situ 3YSZ/Cu composite significantly increased. Moreover, the electrical conductivity of the in-situ composite decreased with the increase of 3YSZ content.
Similar content being viewed by others
References
Zhang R, Gao L, Guo J (2004) Ceram Int 35:1301
Lee DW, Ha GH, Kim BK (2001) Scripta Mater 44:2137
Lee DW, Kim BK (2004) Mater Lett 58:378
Dransmann GW, Steinbrech RW, Pajares A, Guiberteau F, Dominguez-Rodriguez A, Heurer AH (1994) J Am Ceram Soc 77:1194
Mondal P, Klein A, Jaegermann W, Hahn H (1999) Solid State Ionics 118:331
Chour KW, Chen J, Xu R (1997) Thin Solid Films 304:106
Chen S-G, Yin Y-S, Wang D-P, Li J (2004) J Cryst Growth 267:100
Tu JP, Wang NY, Yang YZ, Qi WX, Liu F, Zhang XB, Lu HM, Liu MS (2002) Mater Lett 52:448
Acknowledgements
This work was sponsored by the Tianjin Basic Research Foundation (No. 05YFJZJ C01900) and the Education Ministry Doctorate Foundation (No. 20050056062) of China.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ding, J., Zhao, N., Shi, C. et al. Preparation of 3YSZ/Cu composite by in-situ chemical route. J Mater Sci 42, 5671–5675 (2007). https://doi.org/10.1007/s10853-006-0706-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-006-0706-3