Skip to main content
Log in

The effects of fatty acids on the particle size distribution of the Portland cement

  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

The cement has to be ground fine enough and have the optimum particle size distribution (PSD) to meet the requirements such as strength properties and setting times in current standards. As it takes quite a long time to determine especially the late strength, grinding has to be based on the cement fineness and the PSD. In this study, the effects of fatty acids were investigated on the PSD of Portland cement. Experimental results showed that the fineness of the cement was decreased for that replaced with 0.025 wt.% lauric acid (LA), myristic acid (MA) and sunflower oil acid (SO), then increased for the other additions. The fineness measurements revealed that the cement grains aggregated for an amount of 0.025 % (w) during the grinding. Also, when the PSD of the ground cement is examined, the relationship between the saturated and the unsaturated components is evident that milling the cement clinker together with 0.1% (w) LA and 0.1 wt. % MA gave the finer cement from that with 0.1 wt.% SO.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. Sottili L, Padovani D (2000) ZKG Int 53(10):568

    Google Scholar 

  2. Sottili L, Padovani D (2001) ZKG Int 54(3):146

    Google Scholar 

  3. Wan H, Shui Z, Lin Z (2004) Cem Concr Res 34(1):133

    Article  CAS  Google Scholar 

  4. Lee SH, Kim HJ, Sakai E, Daimon M (2003) Cem Concr Res 33(5):763

    Article  CAS  Google Scholar 

  5. Tsivilis S, Kakali G (1997) Cem Concr Res 27(5):673

    Article  CAS  Google Scholar 

  6. Olorunsogo FT (1998) Cem Concr Res 28(6):907

    Article  CAS  Google Scholar 

  7. Frigione G, Marra S (1976) Cem Concr Res 6(1):113

    Article  CAS  Google Scholar 

  8. Aiqin W, Chengzhi Z, Ningsheng Z (1997) Cem Concr Res 27(5):685

    Article  Google Scholar 

  9. Aiqin W, Chengzhi Z, Ningsheng Z (1999) Cem Concr Res 29(11):1721

    Article  CAS  Google Scholar 

  10. Albayrak AT, Yasar M, Gurkaynak MA, Gurgey I (2005) Cem Concr Res 35(2):400

    Article  CAS  Google Scholar 

  11. ASTM C 430-96, Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No.325) Sieve

  12. ASTM C 188-95, Standard Test Method for Density of Hydraulic Cement

  13. ASTM C 204, Standard Test Method for Fineness of Hydraulic Cement by Air Permeability Apparatus

  14. ASTM C 187-98, Standard Test Method for Normal Consistency of Hydraulic Cement

  15. ASTM C 191-01a, Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle

  16. Kohlhaas B, Labahn O (1983) Cement engineer’s handbook. Wiesbadener Graphische Betriebe, Wiesbaden and Guido Zeidler, Wiesbaden, p 261

    Google Scholar 

  17. Duda WH (1985) Cement-data-book, international process engineering in the cement industry, vol 1, 3 edn. Bauverlag GmbH, Wiesbaden und Berlin, p 191

    Google Scholar 

  18. Albayrak AT (2000) MS Thesis, University of Istanbul, 2000

  19. Perry RH (1984) Perry’s chemical engineers’ handbook, 6th edn. McGraw-Hill, New York, p 8–14

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Muzaffer Yasar.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Albayrak, A.T., Yasar, M., Gurkaynak, M.A. et al. The effects of fatty acids on the particle size distribution of the Portland cement. J Mater Sci 42, 5170–5174 (2007). https://doi.org/10.1007/s10853-006-0566-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-006-0566-x

Keywords

Navigation