References
J.-P. LEBRAT, A. VARMA and A. E. MILLER, Met. Trans. A 23A (1992) 69.
K. A. PHILPOT, Z. A. MUNIR and J. B. HOLT, J. Mater. Sci. 22 (1987) 159.
D. ALMAN and N. S. STOLOFF, Int. J. Powd. Metall. 27(1) (1991) 29.
T. CHENG and J. SUN, Scripta Metall. Mater. 30 (1994) 247.
C. S. MARCHI and A. MORTENSEN, Met. Mater. Trans. A 29A (1998) 2819.
D. C. DUNAND, Mater. Manuf. Process 10(3) (1995) 373.
K. MORSI, H. B. MCSHANE and M. McLEAN, Met. Mater. Trans. A: Phys. Metall. Mater. Sci. 31(6) (2000) 1663.
K. MORSI, H. B. MCSHANE and M. McLEAN, Mater. Sci. Eng. A 290(1) (2000) 39.
K. MORSI, H. MCSHANE and M. MCLEAN, J. Mater. Sci. Letts. 17(19) (1998) 1621.
K. MORSI, H. MCSHANE and M. MCLEAN, J. Mater. Sci. Letts. 19 (2000) 331.
E. J. MINAY, H. B. MCSHANE and R. D. RAWLINGS, Intermetall. 12 (1) (2004) 75.
V. V. PODLESESOV, A. V. RADUGIN, A. M. STOLIN and A. G. MERZHANOV, J. Eng. Phys. Thermophys. (translated from Russian journal Inzhenero-Fizicheskii Zhurnal) 63 (5) (1992) 525.
A. MERZHANOV, A. M. STOLIN and V. V. PODLESOV, J. Eur. Ceram. Soc. 17 (1997) 447.
K. MORSI, J. WALL, J. RODRIGUEZ and S. O. MOUSSA, ASM J. Mater. Eng. Perform. 12 (2003) 147.
Annual Book of ASTM Standards, “Metals-Mechanical-Testing; Elevated and Low-Temperature Tests; Metallorgaphy” (ASTM 1916 Race Street, Philadelphia, PA, USA, 1995) vol. 3.01, p. 236.
J. BYSTRZYCKI and R. A. VARIN, Intermetall 6(4) (1998) 277.
G. E. DIETER, “Mechanical Metallurgy,” Metallurgy and Metallurgical Engineering Series (The Mapel Press Company, York, PA, USA, 1961) p. 514.
EXTRUSION, in ASM Specialty Handbook, Al and Al-Alloys (The Materials Information Society), edited by J. R. Davis and Associates (1993) p. 262.
W. MISIOLEK and R. G. GERMAN, Mater. Sci. Eng. A144 (1991) 5.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Morsi, K., Moussa, S.O. & Wall, J.J. Simultaneous combustion synthesis (thermal explosion mode) and extrusion of nickel aluminides. J Mater Sci 40, 1027–1030 (2005). https://doi.org/10.1007/s10853-005-6526-z
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10853-005-6526-z