References
V. K. SIKKA, J. T. MAVITY and K. ANDERSON, Mater. Sci. Eng. A153 (1992) 712.
D. ALMAN and N. S. STOLOFF, Int. J. Powd. Metall. 27 (1991) 29.
W. MISLIOLEK and R. M. GERMAN, Mater. Sci. Eng. A144 (1991) 1.
T. CHENG and J. SUN, Scripta Metall. Mater. 30 (1994) 247.
K. MORSI, H. B. MCSHANE and M. MCLEAN, Metall. and Mater. Trans. A. 31 (2000) 1663.
K. MORSI, H. B. MCSHANE and M. MCLEAN, Mater. Sci. & Eng. A290 (2000) 39.
K. A. PHILPOT, Z. A. MUNIR and J. B. HOLT, J. Mater. Sci. 22 (1987) 159.
K. MORSI, S. O. MOUSSA and J. J. WALL, ibid. 40 (2005) 1027.
V. V. PODLESESOV, A. V. RADUGIN and A. M. STOLIN, A. G. MERZHANOV, Translated from Russian journal Inzhenero-Fizicheskii Zhurnal (J. Eng. Phys. Thermophys.), 63 (1992) 525.
A. MERZHANOV, A. M. STOLIN and V. V. PODLESOV, J. Europ. Ceram. Soc. 17 (1997) 447.
Annual Book of ASTM Standards, “Metals-Mechanical Testing; Elevated and Low-Temperature Tests; Metallography” (ASTM 1916 Race street, Philadelphia, PA, USA, 1995) Vol. 3.01, p. 236.
G. E. DIETER, Mechanical Metallurgy, SI Metric Edition. (McGraw-Hill, London, 1988) p. 629.
P. PEREZ, J. L. GONZALES-CARRASCO and P. ADEVA, Oxid. Met. 49 (1998) 485.
Idem. Corro. Sci. 40 (1998) 631.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Morsi, K., Moussa, S.O. & Wall, J.J. Reactive extrusion and high-temperature oxidation of Ni3Al. J Mater Sci 41, 1265–1268 (2006). https://doi.org/10.1007/s10853-005-4233-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-005-4233-4