Abstract
The isothermal oxidation behavior of TiNi specimens with or without laser surface melted (LSM) layers in pure oxygen over the temperature range of 600—800°C was studied. Characterization of the specimens after oxidation was conducted using X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The oxidation resistance of the LSM specimens has been improved significantly. The formation of a compact oxide layer on the LSM specimens contributes to good oxidation resistance.
Similar content being viewed by others
References
B. THIERRY, M. TABRIZIAN, C. TREPANIER, O. SAVADOGO and L. H. YAHIA, J. Biomed. Mater. Res. 51 (2000) 685.
D. J. WEVER, A. G. VELDHUIZEN, J. DE VRIES, H. J. BUSSCHER, D. R. A. UGES and J. R. VAN HORN, Biomaterials 19 (1998) 761.
C. M. CHAN, S. TRIGWELL and T. DUERING, Surface and Interface Analysis 15 (1990) 349.
G. S. FIRSTOV, R. G. VITCHEV, H. KUMAR, B. BLANPAIN, J. VAN HUMBEECK, Biomaterials 23 (2002) 4862.
C. L. CHU, S. K. WU and Y. C. YEN, Materilas Science and Engineering A 216 (1996) 193–200.
C. H. XU, X. Q. MA, S. Q. SHI and C. H. WOO, ibid. 371 (2004) 45.
C. TREPANIER, M. TABRIZIAN, L. H. BILODEAU and D. L. PIRON, J. Biomed. Mater. Res. 43 (1998) 433.
H. C. MAN, Z. D. CUI and T. M. YUE, Scripta Materialia 45 (2001) 1447.
H. G. LEE, in “Chemical Thermodynamics for Metals and Materials” (Imperial College Press, 1999) p. 275.
N. BIRKS and G. H. MEIER, in “Introduction to High Temperature Oxidation of Metals” (Edward Arnold, London, 1983) p. 105.
S. A. KEKARE, D. K. SHELTON and P. B. ASWATH, in “Oxidation of High Temperature Intermetallics” (The Minerals, Metals & Materials Society, Warrendale, PA, 1993) p. 325.
B. Thaddeus, in “Binary Alloy Phase Diagrams” (ASM International, 1990) p. 2875.
C. Z. WAGNER, Elektrochem. 63 (1959) 772.
G. P. RODRIGUEZ, I. GARCIA, J. DAMBORENEA, Oxidation of Metals 58 (2002) 235.
L. R. KATIPELLI AND N. B. DAHOTRE, Materials Science and Technology 17 (2001) 1061.
Z. LIU, W. GAO, K. L. DAHM and F. WANG, Acta Mater. 46 (1998) 1691.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xu, C.H., Shi, S.Q., Man, H.C. et al. Oxidation behavior of the TiNi shape memory alloy with a laser surface melted layer. J Mater Sci 41, 1123–1129 (2006). https://doi.org/10.1007/s10853-005-3649-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-005-3649-1