Skip to main content
SpringerLink
Log in

The effect of Ni, ZrB2 and MoS2 additives on certain physico-chemical and mechanical properties of special glasses in the ZnO-PbO-B2O3-SiO2 system

  • Proceedings of the IV International Conference High Temperature Capillarity
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

The influence of additives of metal compounds (ZrB2, MoS2) and nickel to the abrasive masses based on devitrified glasses of ZnO-PbO-B2O3-SiO2 system was studied by investigating both the wettability of submicrocrystalline sintered corundum, and the size, structure and chemistry of the interfaces. XRD analysis, scanning electron microscopy with X-ray microanalysis, wettability tests and microhardness measurements were performed. The experimental results were compared with the probability of reaction between the abrasive grain (cBN, submicrocrystalline sintered corundum) and: (1) the additives of metal compounds, (2) devitrified glass binders identified by using a VCS algorithm designed for thermodynamic calculations. It was confirmed that 18–20 compounds (6–9 in condensed phase) out of 230 exhibited chemical stability.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. J. PLICHTA, “Foundations of Grinding Process Using Grinding Wheels with Microcrystalline Grains of the Regular Boron Nitride with Vitrified Bond” (Koszalin Technical University, Koszalin, Poland, 1996, No. 58).

    Google Scholar 

  2. CZ. NIŻANKOWSKI and L. PRZYBYLSKI, in Proc. XXV Scientific School of Grinding Treatment (Technical University of WrocŁaw, Poland 2002) p. 17.

  3. J. COOK, Canadian Machinary and Metalworking 2 (1992) 37.

    Google Scholar 

  4. E. A. BONDARENKO and A. E. SHILA, Sverhtvierdye Materialy 5 (2000) 38.

    Google Scholar 

  5. V. G. SAVINSKAJA, A. M. SARAJKIN and A. A. ADAMOWSKI, Poroskovaja Metalurgija 8 (1991) 94.

    Google Scholar 

  6. H. K. TONSHOFF, B. KARPUSCHEVSKI, P. ANDREA and A. TURICH, Ann. CIRP 47 (1998) 723.

    Google Scholar 

  7. J. A. BORKOWSKI and A. SZYMANSKI, “Uses of Abrasives and Abrasive Tools” (PWN, Warszawa, 1992).

    Google Scholar 

  8. B. PROCYK, B. STANIEWICZ-BRUDNIK and K. MAJEWSKA-ALBIN, Trans. IWRI 30 (2001) 149.

    CAS  Google Scholar 

  9. B. STANIEWICZ-BRUDNIK, B. PROCYK, M. RODA and K. MAJEWSKA-ALBIN, Optica Applicata 1 (2003) 167.

    Google Scholar 

  10. E. BENKO and A. WYCZESANY, J. Eur. Cer. Soc. 14 (1994) 557.

    Article  CAS  Google Scholar 

  11. E. RABKIN, D. CHATAIN, J. BERNARDINI and D. MONHOUX, Trans. IWRI 30 (2001) 1.

    CAS  Google Scholar 

  12. N. SOBCZAK, M. KSIŻEK, W. RADZIWIŁŁ, L. STOBIERSKI and B. MIKUŁOWSKI, Trans. IWRI 30 (2001) 125.

    CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. The Institute of Metal Cutting, Cracow, Wroclawska 37a Str

    B. Staniewicz-Brudnik & K. Majewska-Albin

  2. The Technical University of Science and Technology, Cracow, Mickiewicza 30 Ave

    B. Trybalska

Authors
  1. B. Staniewicz-Brudnik
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. K. Majewska-Albin
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. B. Trybalska
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to B. Staniewicz-Brudnik.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Staniewicz-Brudnik, B., Majewska-Albin, K. & Trybalska, B. The effect of Ni, ZrB2 and MoS2 additives on certain physico-chemical and mechanical properties of special glasses in the ZnO-PbO-B2O3-SiO2 system. J Mater Sci 40, 2541–2546 (2005). https://doi.org/10.1007/s10853-005-1989-5

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-005-1989-5

Keywords

Search

Navigation