Iterative Learning-Based Admittance Control for Autonomous Excavation

Abstract

This paper presents the development and field validation of an iterative learning-based admittance control algorithm for autonomous excavation in fragmented rock using robotic wheel loaders. An admittance control strategy is augmented with iterative learning, which automatically updates control parameters based on the error between a target bucket fill weight and the measured fill weight at the end of each excavation pass. The algorithm was validated through full-scale autonomous excavation experiments with a 14-tonne capacity load-haul-dump (LHD) machine and two different types of excavation materials: fragmented rock and gravel. In both excavation scenarios, the iterative learning algorithm is able to update the admittance control parameters for a specified target bucket fill weight, eliminating the need to manually re-tune control parameters as material characteristics change. These results have practical significance for increasing the autonomy of robotic wheel loaders used in mining and construction.

This is a preview of subscription content, log in to check access.

References

  1. 1.

    Bristow, D.A., Tharayil, M., Alleyne, A.G.: A survey of iterative learning control. IEEE Control. Syst. Mag. 26(3), 96–114 (2006)

    Article  Google Scholar 

  2. 2.

    Buchli, J., Stulip, F., Theodorou, E., Schaal, S.: Learning variable impedance control. Int. J. Robot. Res. 30(7), 820–833 (2011)

    Article  Google Scholar 

  3. 3.

    Dadhich, S., Bodin, U., Andersson, U.: Key challenges in automation of earth-moving machines. Autom. Constr. 68, 212–222 (2016)

    Article  Google Scholar 

  4. 4.

    Dadhich, S., Bodin, U., Sandin, F., Andersson, U.: Machine learning approach to automatic bucket fill. In: Proceedings of 24th Mediterranean Conference on Control and Automation, Athens, pp. 1260–1265 (2016)

  5. 5.

    Dadhich, S., Sandin, F., Bodin, U., Andersson, U., Martinsson, T.: Field test of neural-network based automatic bucket-filling algorithm for wheel-loaders. Autom. Construct. 97, 1–12 (2019). https://doi.org/10.1016/j.autcon.2018.10.013

    Article  Google Scholar 

  6. 6.

    Dimeas, F., Aspragathos, N.: Reinforcement learning of variable admittance control for human-robot co-manipulation. In: Proceedings of the 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems, Hamburg, pp. 1011–1016 (2015)

  7. 7.

    Dobson, A.A., Marshall, J.A., Larsson, J.: Admittance control for robotic loading: Design and experiments with a 1-tonne loader and a 14-tonne LHD. Invited Paper, Special Issue Field Serv. Robot. J. Field Robot. 34(1), 123–150 (2017)

    Google Scholar 

  8. 8.

    Fernando, H., Marshall, J.A., Almqvist, H., Larsson, J.: Towards Controlling Bucket Fill Factor in Robotic Excavation by Learning Admittance Control Setpoints. In: Hutter, M., Siegwart, R. (eds.) Field and Service Robotics: Results of the 11Th International Conference, pp. 35–48, Zürich (2017)

  9. 9.

    Goska, W.J., Muller, J.Y., Gaibler, D.W., Thompson, D., Lawe, D.A., Van Schoiack, M.M.: Computerized monitoring management system for load carrying vehicle, vol. 5 (1997)

  10. 10.

    Haddadin, S., Croft, E.: Springer Handbook of Robotics, 2 Edn., Chap. 69–Physical Human-Robot Interaction. Springer International Publishing, Switzerland, pp. 1835–1874 (2016)

    Google Scholar 

  11. 11.

    Hemami, A., Hassani, F.: An overview of autonomous loading of bulk material. In: Proceedings of the 26th International Symposium on Automation Robotics in Construction, Austin, pp. 405–411 (2009)

  12. 12.

    Jiménez, M.F., Monllor, M., Frizera, A., Bastos, T., Roberti, F., Carelli, R.: Admittance controller with spatial modulation for assisted locomotion using a smart walker. Journal of Intelligent & Robotic Systems. https://doi.org/10.1007/s10846-018-0854-0 (2018)

    Article  Google Scholar 

  13. 13.

    Kim, Y.J., Seo, J., Kim, H., Kim, K.G.: Impedance and admittance control for respiratory-motion compensation during robotic needle insertion – a preliminary test. The International Journal of Medical Robotic and Computer Assisted Surgery 13(3), 1–10 (2016)

    Article  Google Scholar 

  14. 14.

    Li, Y., Ge, S.: Impedance learning for robots interacting with unknown envirnonments. IEEE Trans. Control Syst. Technol. 22(4), 1422–1432 (2014)

    Article  Google Scholar 

  15. 15.

    Maeda, G.J., Manchester, I.R., Rye, D.C.: Combined ILC and disturbance observer for the rejection of near-repetitive disturbances, with application to excavation. IEEE Trans. Control Syst. Technol. 23(5), 1754–1769 (2015)

    Article  Google Scholar 

  16. 16.

    Marshall, J.A., Murphy, P.F., Daneshmend, L.K.: Toward autonomous excavation of fragmented rock: full-scale experiments. IEEE Trans. Autom. Sci. Eng. 5(3), 562–566 (2008)

    Article  Google Scholar 

  17. 17.

    Seraji, H.: Adaptive admittance control: an approach to explicit force control in compliant motion. In: Proceedings of the 1994 IEEE International Conference on Robotics and Automation, San Diego, pp. 2705–2712 (1994)

  18. 18.

    Villani, L., De Schutter, L.: Springer Handbook of Robotics, 2 edn., chap. 9–Force Control. Springer International Publishing, Switzerland, pp. 195–220 (2016)

    Google Scholar 

  19. 19.

    Wang, C., Li, Y., Ge, S.S., Lee, T.H.: Reference adaptation for robots in physical interactions with unknown environments. IEEE Trans. Cybern. 47(11), 3504–3515 (2017)

    Article  Google Scholar 

  20. 20.

    Yamawaki, T., Ishikawa, H., Yashima, M.: Iterative learning of variable impedance control for human-robot cooperation. In: Proceedings of the 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems, Daejeon, pp. 839–844 (2016)

Download references

Acknowledgements

The authors would like to thank Håkan Almqvist for his assistance with the field experiments; as well as Ola Petersson, Jörgen Appelgren and Robert Lundh for many useful discussions; and Qing Huang for assistance with programming.

Author information

Affiliations

Authors

Corresponding author

Correspondence to Heshan Fernando.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

This work was supported in part by the Natural Sciences and Engineering Research Council of Canada (NSERC) under project RGPIN-2015-04025, the Swedish Knowledge Foundation (KK-stiftelsen) under project 20150282, and by Epiroc Rock Drills AB (Sweden).

This work was completed while the second author was a KKS International Visiting Professor at the Centre for Applied Autonomous Sensor Systems (AASS) in the School of Science and Technology at Örebro University, Sweden.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Fernando, H., Marshall, J.A. & Larsson, J. Iterative Learning-Based Admittance Control for Autonomous Excavation. J Intell Robot Syst 96, 493–500 (2019). https://doi.org/10.1007/s10846-019-00994-3

Download citation

Keywords

  • Autonomous excavation
  • Iterative learning
  • Admittance control
  • Mining robotics