Skip to main content

Correction to: Quality 4.0: a review of big data challenges in manufacturing

The Original Article was published on 11 April 2021

Correction to: Journal of Intelligent Manufacturing https://doi.org/10.1007/s10845-021–01765-4

The article “Quality 4.0: a review of big data challenges in manufacturing”, written by Carlos A. Escobar, Megan E. McGovern and Ruben Morales-Menendez., was originally published electronically on the publisher’s internet portal on 11 April 2021 without open access. With the author(s)’ decision to opt for Open Choice the copyright of the article changed on 12 May 2021 to © The Author(s) 2021 and the article is forthwith distributed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0.

The original article has been corrected.

Author information

Affiliations

Authors

Corresponding author

Correspondence to Carlos A. Escobar.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Escobar, C.A., McGovern, M.E. & Morales-Menendez, R. Correction to: Quality 4.0: a review of big data challenges in manufacturing. J Intell Manuf 32, 2375 (2021). https://doi.org/10.1007/s10845-021-01786-z

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10845-021-01786-z