# A geometric error budget method to improve machining accuracy reliability of multi-axis machine tools

- 477 Downloads
- 2 Citations

## Abstract

Machining accuracy reliability is considered to be one of the most important indexes in the process of performance evaluation and optimization design of the machine tools. Geometric errors, thermal errors and tool wear are the main factors to affect the machining accuracy and so affect the machining accuracy reliability of machine tools. This paper proposed a geometric error budget method that simultaneously considers geometric errors, thermal errors and tool wear to improve the machining accuracy reliability of machine tools. Homogeneous transformation matrices, neural fuzzy control theory and a tool wear predictive approach were employed to develop a comprehensive error model, which shows the influence of the geometric, thermal errors and tool wear to the machining accuracy of a machine tool. Based on Rackwite–Fiessler and Advanced First Order and Second Moment, a reliability model and a sensitivity model were put forward, which can deal with the errors of a machine tool drawn from any distribution. Then, a geometric error budget method of multi-axis NC machine tool was developed and formed into a mathematical model. In such method, the minimum cost of machine tool was the optimization objective, the reliability of the machining accuracy was the constraint, and the sensitivity was to identify the geometric errors to be optimized. An example conducted on a five-axis NC machine tool was used to explain and validate the proposed method.

## Keywords

Thermal errors Tool wear A comprehensive error model Machining accuracy reliability Geometric error budget## List of symbols

- \(\Delta x_{x}\)
Positioning error

- \(\Delta y_{x}\)
Y direction of straightness error

- \(\Delta z_{x}\)
Z direction of straightness error

- \(\Delta \alpha _{x}\)
Roll error

- \(\Delta \beta _{x}\)
Pitch error

- \(\Delta \gamma _{x}\)
Yaw error

- \(\Delta x_{y}\)
X direction of straightness error

- \(\Delta y_{y}\)
Positioning error

- \(\Delta z_{y}\)
Z direction of straightness error

- \(\Delta \alpha _{y}\)
Pitch error

- \(\Delta \beta _{y}\)
Roll error

- \(\Delta \gamma _{y}\)
Yaw error

- \(\Delta x_{z}\)
X direction of straightness error

- \(\Delta y_{z}\)
Y direction of straightness error

- \(\Delta z_{z}\)
Positioning error

- \(\Delta \alpha _{z}\)
Pitch error

- \(\Delta \beta _{z}\)
Yaw error

- \(\Delta \gamma _{z}\)
Roll error

- \(\Delta x_{B}\)
X direction run-out error

- \(\Delta y_{B}\)
Y direction run-out error

- \(\Delta z_{B}\)
Z direction run-out error

- \(\Delta \alpha _{B}\)
Around the X-axis turning error

- \(\Delta \beta _{B}\)
Turning error

- \(\Delta \gamma _{B}\)
Around the Z-axis turning error

- \(\Delta x_{A}\)
X direction run-out error

- \(\Delta y_{A}\)
Y direction run-out error

- \(\Delta z_{A}\)
Z direction run-out error

- \(\Delta \alpha _{A}\)
Turning error

- \(\Delta \beta _{A}\)
Around the Y-axis turning error

- \(\Delta \gamma _{A}\)
Around the Z-axis turning error

- \(\Delta x_\varphi \)
X direction run-out error

- \(\Delta y_\varphi \)
Y direction run-out error

- \(\Delta z_\varphi \)
Z direction run-out error

- \(\Delta \alpha _\varphi \)
Around the X-axis turning error

- \(\Delta \beta _\varphi \)
Around the Y-axis turning error

- \(\Delta \gamma _\varphi \)
Turning error

- \(\Delta \gamma _{{xy}}\)
X, Y-axis perpendicularity error

- \(\Delta \beta _{xz}\)
X, Z-axis perpendicularity error

- \(\Delta \alpha _{yz}\)
Y, Z-axis perpendicularity error

- \(\Delta \gamma _{xB}\)
B-axis parallelism error in YZ plane

- \(\Delta \alpha _{zB}\)
B-axis parallelism error in XY plane

- \(\Delta \gamma _{yA}\)
A-axis parallelism error in XZ plane

- \(\Delta \beta _{zA}\)
A-axis parallelism error in XY plane

- \(\Delta y_{AB}\)
An offset errors between A, B-axis along Y-axis

- \(\Delta z_{AB}\)
An offset errors between A, B-axis along Z-axis

- \(\Delta x_t\)
X direction of straightness error

- \(\Delta y_t\)
Y direction of straightness error

- \(\Delta z_t\)
Positioning error

- \(\Delta \alpha _t\)
Pitch error

- \(\Delta \beta _t\)
Yaw error

- \(\Delta \gamma _t\)
Roll error

## Notes

### Acknowledgments

The authors are most grateful to the National Natural Science Foundation of China (Nos. 51575010 and 51575009), Beijing Nova Program (Z1511000003150138), the Leading Talent Project of Guangdong Province, Open Project of State Key Lab of Digital Manufacturing Equipment & Technology (Huazhong University of Science and Technology), Shantou Light Industry Equipment Research Institute of science and technology Correspondent Station (2013B090900008), the National Science and Technology Major Project (2013ZX04013-011), the Jing-Hua Talents Project of Beijing University of Technology and the National Science and Technology Major Project (2013ZX04013) for supporting this research presented in this paper.

## References

- Cai, L. G., Zhang, Z. L., Cheng, Q., Liu, Z. F., & Gu, P. H. (2015). A geometric accuracy design method of multi-axis NC machine tool for improving machining accuracy reliability.
*Eksploatacja i Niezawodnosc-Maintenance and Reliability*,*17*(1), 143–155.CrossRefGoogle Scholar - Cai, L. G., Zhang, Z. L., Cheng, Q., Liu, Z. F., Gu, P. H., & Qi, Y. (2016). An approach to optimize the machining accuracy retainability of multi-axis NC machine tool based on robust design.
*Precision Engineering*,*43*, 370–386.CrossRefGoogle Scholar - Carlos, C. A., & Hoffbauer, N. L. (2009). An approach for reliability-based robust design optimisation of angle-ply composites.
*Composite Structures*,*90*, 53–59.CrossRefGoogle Scholar - Chen, J. S. (1995). Computer-aided accuracy enhancement for multi-axis CNC machine tool.
*International Journal of Machine Tools and Manufacture*,*35*(4), 593–605.CrossRefGoogle Scholar - Cheng, Q., Qi, Z., Zhang, G. J., Zhao, Y. S., Sun, B. W., & Gu, P. H. (2016). Robust modelling and prediction of thermally induced positional error based on grey rough set theory and neural networks.
*International Journal of Machine Tools and Manufacture*,*83*(5), 753–764.Google Scholar - Cheng, Q., Zhao, H., Zhao, Y., et al. (2015a). Machining accuracy reliability analysis of multi-axis machine tool based on Monte Carlo simulation.
*Journal of Intelligent Manufacturing*. doi: 10.1007/s10845-015-1101-1. - Cheng, Q., Zhang, Z. L., Zhang, G. J., Gu, P. H., & Cai, L. G. (2015b). Geometric accuracy allocation for multi-axis CNC machine tools based on sensitivity analysis and reliability theory.
*Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science*,*229*(6), 1134–1149.Google Scholar - Choudhury, S. K., & Rath, S. (2000). In-process tool wear estimation in milling using cutting force model.
*Journal of Materials Processing Technology*,*99*(1), 113–119.CrossRefGoogle Scholar - Ding, W., Zhou, M., Huang, X., et al. (2007). Study on accuracy design of multi-axis machine tools oriented to remanufacturing.
*Journal of Basic Science and Engineering*,*15*(4), 559–568.Google Scholar - Dorndorf, U., Kiridena, V. S. B., & Ferreira, P. M. (1994). Optimal budgeting of quasistatic machine tool errors.
*Journal of Engineering for Industry*,*116*(1), 42–53.CrossRefGoogle Scholar - Dufour, P., & Groppetti, R. (1981). Computer aided accuracy improvement in large NC machine-tools. In
*Proceedings of the 2006 international conference on the MTDR*(Vol. 22, pp. 611–618).Google Scholar - El Ouafi, A., Guillot, M., & Bedrouni, A. (2000). Accuracy enhancement of multi-axis CNC machines through on-line neurocompensation.
*Journal of Intelligent Manufacturing*,*11*(6), 535–545.CrossRefGoogle Scholar - Fan, K. C., Chen, H. M., & Kuo, T. H. (2012). Prediction of machining accuracy degradation of machine tools.
*Precision Engineering*,*36*(2), 288–298. doi: 10.1016/j.precisioneng.2011.11.002.CrossRefGoogle Scholar - Fu, G. Q., Fu, J. Z., Xu, Y. T., Chen, Z. C., & Lai, J. T. (2015). Accuracy enhancement of five-axis machine tool based on differential motion matrix: Geometric error modeling, identification and compensation.
*International Journal of Machine Tools and Manufacture*,*89*, 170–181.CrossRefGoogle Scholar - Glass, K., & Colbaugh, R. (1996). Real-time tool wear estimation using cutting force measurements.
*Proceedings—IEEE International Conference on Robotics and Automation*,*4*, 3067–3072.CrossRefGoogle Scholar - Guo, Q. J., Yang, J. G., & Wu, H. (2010). Application of ACO-BPN to thermal error modeling of NC machine tool.
*International Journal of Advanced Manufacturing Technology*,*50*, 667–675.CrossRefGoogle Scholar - Guo, S. (2012).
*Research on modeling and compensation of machining error induced by tool wear*. Nanjing: Nanjing University of Aeronautics and Astronautics.Google Scholar - Hocken, R., Simpson, J. A., Borchardt, B., et al. (1977). Three dimensional metrology.
*Annals of the CIRP*,*26*(2), 403–408.Google Scholar - Kang, Y., & Chang, C. W. (2007). Modification of a neural network utilizing hybrid filters for the compensation of thermal deformationin machine tools.
*International Journal of Machine Tools and Manufacture*,*47*, 376–387.CrossRefGoogle Scholar - Khan, A. W., & Chen, W. Y. (2011). A methodology for systematic geometric error compensation in five-axis machine tools.
*International Journal of Advanced Manufacturing Technology*,*53*, 615–628.CrossRefGoogle Scholar - Kiridena, V., & Ferreira, P. M. (1993). Mapping the effects of positioning errors on the volumetric accuracy of five-axis CNC machine tools.
*International Journal of Machine Tools and Manufacture*,*33*(3), 417–437.CrossRefGoogle Scholar - Kong, D. D., Chen, Y. J., Li, N., & Tan, S. L. (2016). Tool wear monitoring based on kernel principal component analysis and v-support vector regression.
*International Journal of Machine Tools and Manufacture*. doi: 10.1007/s00170-016-9070-x. - Lee, D. M., & Yang, S. H. (2010). Mathematical approach and general formulation for error synthesis modeling of multi-axis system.
*International Journal of Modern Physics B*,*4*(15–16), 2737–2742.CrossRefGoogle Scholar - Li, B., Hong, J., & Liu, Z. (2014). Stiffness design of machine tool structures by a biologically inspired topology optimization method.
*International Journal of Machine Tools and Manufacture*,*84*, 33–44.CrossRefGoogle Scholar - Li, S. Y., Dai, Y. F., Yin, Z. Q., et al. (2007).
*Accuracy modeling technology of precision and ultra-precision machine tool*. Changsha: National University of Defense Technology Press.Google Scholar - Liu, Y. W., Zhang, Q., Zhao, X. S., & Zhang, Z. F. (2002). Multi-body system based technique for compensating thermal errors in machining centers.
*Chinese Journal of Mechanical Engineering*,*38*(1), 127–130.CrossRefGoogle Scholar - Lu, Y., Yao, Y. X., & Xu, H. Y. (1999). Intelligent identification of tool wear based on the state information state fusion of various parameters.
*Aviation Precision Manufacturing Technology*,*35*(6), 26–30.Google Scholar - Lu, Z. Y., Song, S. F., Li, H. S., et al. (2009).
*Structural reliability and reliability sensitivity analysis organization*. Beijing: Sciences Press.Google Scholar - Portman, V. T. (1981). A universal method for calculating the accuracy of mechanical devices.
*Soviet Engineering Research*,*1*(7), 11–15.Google Scholar - Sarkar, S., & Dey, P. P. (2015). Tool path generation for algebraically parameterized surface.
*Journal of Intelligent Manufacturing*,*26*(2), 415–421.CrossRefGoogle Scholar - Stryczek, R. (2014). A metaheuristic for fast machining error compensation.
*Journal of Intelligent Manufacturing*. doi: 10.1007/s10845-014-0945-0. - Tao, P. Y., Yang, G., Sun, Y. C., Tomizuka, M., & Lai, C. Y. (2012). Product-of-exponential (POE) model for kinematic calibration of robots with joint compliance. In
*IEEE/ASME international conference on advanced intelligent mechatronics (AIM)*(Vol. 75, pp. 1–4).Google Scholar - Tortuma, A., Yayla, N., & Gökdag, M. (2009). The modeling of mode choices of intercity freight transportation with the artificial neural networks and adaptive neuro-fuzzy inference system.
*Expert Systems with Applications*,*36*, 6199–6217.CrossRefGoogle Scholar - Wang, H. T., Wang, L. P., Li, T. M., & Han, J. (2013). Thermal sensor selection for the thermal error modeling of machine tool based on the fuzzy clustering method.
*International Journal of Advanced Manufacturing Technology*,*69*, 121–126.CrossRefGoogle Scholar - Xu, X. (2013).
*Research and application on accuracy distribution and optimization of high-grade CNC machine tools*. Hangzhou: Zhejiang University.Google Scholar - Yan, J. Y., & Yang, J. G. (2009). Application of synthetic grey correlation theory on thermal, point optimization for machine tool thermal error compensation.
*International Journal of Advanced Manufacturing Technology*,*43*, 1124–1132.CrossRefGoogle Scholar - Yang, H., & Ni, J. (2003). Dynamic modeling for machine tool thermal error compensation.
*Journal of Manufacturing Science and Engineering*,*125*(2), 245–254.CrossRefGoogle Scholar - Yang, J. (2012).
*Research on structure reliability calculation method and sensitivity analysis*. Dalian: Dalian University of Technology.Google Scholar - Yang, J. G., Wang, X. S., & Zhao, H. T. (2005). Temperature measurement points optimization selection of machine tools. In
*Chinese Mechanical Engineering Society annual conference*(pp. 627–632).Google Scholar - Yu, Z. M., Liu, Z. J., Ai, Y. D., & Xiong, M. (2013). Geometric error model and precision distribution based on reliability theory for large CNC gantry guideway grinder.
*Journal of Mechanical Engineering*,*49*(17), 142–151.CrossRefGoogle Scholar - Yu, Z. M., Liu, Z. J., Ai, Y. D., et al. (2014). Thermal error modeling of NC machine tool using neural fuzzy control theory.
*Chinese Journal of Mechanical Engineering*,*25*(16), 2224–2231.Google Scholar - Zeroudi, N., & Fontaine, M. (2015). Prediction of tool deflection and tool path compensation in ball-end milling.
*Journal of Intelligent Manufacturing*,*26*(3), 425–445. doi: 10.1007/s10845-013-0800-8.CrossRefGoogle Scholar - Zhang, D., Wang, L., Gao, Z., & Su, X. (2013). On performance enhancement of parallel kinematic machine.
*Journal of Intelligent Manufacturing*,*24*(2), 267–276.CrossRefGoogle Scholar - Zhang, H. T., Yang, J. G., & Jiang, H. (2009). Application of fuzzy neural network theory in thermal error compensation modeling of NC machine tool.
*Journal of Shanghai Jiangtong University, 43*(12), 1950–1952, 1961.Google Scholar - Zhang, Y., Yang, J. G., & Jiang, H. (2012). Machine tool thermal error modeling and prediction by grey neural network.
*International Journal of Advanced Manufacturing Technology*,*59*, 1065–1072.CrossRefGoogle Scholar