Abstract
Ferroelectric Ba0.5Sr0.5TiO3 (BST) films were prepared on Pt/Ti/SiO2/Si substrates by the sol-gel process. The films were spin-coated at 2000 rpm for 30 secs and then pyrolysed for 5 mins at the temperature of 350∘C. This coating procedure was repeated for 3, 4, 5 and 6 times to obtain BST films with different thicknesses. After coating the films with the desired repetition times, the films were finally annealed in a conventional furnace at temperatures ranging from 600∘C to 800∘C with a 50∘C interval in between. The films obtained with an annealing procedure of 750∘C were polycrystalline with the presence of an impurity BaCO3 phase. The capacitance and leakage current were measured and used to extract information on the metal-BST interface. With the series capacitance model and modified Schottky emission equation, the thickness of the dead layers for Au/BST and Pt/BST interfaces were calculated to be less than 6 nm and 5 nm, respectively.
Similar content being viewed by others
References
C.S. Hwang, S.O. Park, H.-J. Cho, C.S. Kang, H.K. Kang, S.I. Lee, and M.Y. Lee, Appl. Phys. Lett., 67, 2819 (1995).
J. Pak, J. Chang, K. Nam, J. Lee, J. Kim, and G. Park, J. Korean Phys. Soc., 42, S1330 (2003).
E. Ko, J. Pak, K. Nam, and G. Park, J. Korean Phys. Soc., 46, 269 (2005).
J.-S. Kim, J.S. Choi, B.H. Park, H.-J. Choi, and J.-K. Lee, J. Korean Phys. Soc., 46, 183 (2005).
S.E. Moon, M.H. Kwak, Y.-T. Kim, H.-C. Ryu, S.-J. Lee, and K.-Y. Kang, J. Korean Phys. Soc., 46, 273 (2005).
Y.H. Wang, B. Gu, G.D. Xu, and Y.Y. Zhu, Appl. Phys. Lett., 84, 1686 (2004).
Thin Film Ferroelectric Materials and Devices, edited by R. Ramesh (Kluwer Academic, Boston, 1997).
A.K. Tagantsev, V.O. Sherman, K.F. Astefiev, J. Venkatesh, and N. Setter, J. Electroceram., 11, 5 (2003).
A. Von Hippel, NDRC Div., 14, Rept. 300, PB. 4660 (1944).
B.T. Lee and C.S. Hwang, Appl. Phys. Lett., 77, 124 (2000).
C. Zhou and D.M. Newns, J. Appl. Phys., 82, 3081 (1997).
C.S. Hwang, J. Appl. Phys., 92, 432 (2002).
W.Y. Park, K.H. Ahn, and C.S. Hwang, Appl. Phys. Lett., 83, 4387 (2003).
A.M. Bratkovsky and A.P. Levanyuk, Phys. Rev. Lett., 84, 3177 (2000).
M. Viviani, M.T. Buscaglia, P. Nanni, R. Parodi, G. Gemme, and A. Dacca, J. Eur. Ceram. Soc., 19, 1047 (1999).
S.B. Desu, Mater. Res. Soc. Symp. Proc., 541, 457 (1999).
G.W. Dietz, R. Waser, S.K. Steiffer, C. Basceri, and A.I. Kingon, J. Appl. Phys., 82, 2359 (1997).
S. Zafar, R.E. Jones, B. Jiang, B. White, V. Kaushik, and S. Gillespie, Appl. Phys. Lett., 73, 3533 (1998).
B. Chen, H. Yang, J. Miao, L. Zhao, L.X. Cao, B. Xu, X.G. Qiu, and B.R. Zhao, J. Appl. Phys., 97, 024106 (2005).
B. Chen, H. Yang, L. Zhao, J. Miao, B. Xu, X.G. Qiu, B.R. Zhao, X.Y. Qi, and X.F. Duan, Appl. Phys. Lett., 84, 583 (2004).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, J., Pak, J., Nam, K. et al. Calculation of the intrinsic dead layers thicknesses from Au/Ba0.5Sr0.5TiO3/Pt thin film capacitors. J Electroceram 16, 495–498 (2006). https://doi.org/10.1007/s10832-006-9904-2
Issue Date:
DOI: https://doi.org/10.1007/s10832-006-9904-2