Abstract
Spray pyrolysis has been applied to deposit a wide variety of thin films. These films were used in various devices such as solar cells, sensors, and solid oxide fuel cells. It is observed that often the properties of deposited thin films depend on the preparation conditions. An extensive review of the effects of spray parameters on film quality is given to demonstrate the importance of the process of optimization. The substrate surface temperature is the most critical parameter as it influences film roughness, cracking, crystallinity, etc. Processes involved in the spray pyrolysis technique are discussed in this review as well.
Similar content being viewed by others
References
W.A. Bryant, J. Mater. Sci., 12(7), 1285 (1977).
R.N. Ghoshtagore, J. Electrochem. Soc., 125(1), 110 (1978).
T. Suntola, Thin Solid Films, 216(1), 84 (1992).
R.R. Chamberlin and J.S. Skarman, J. Electrochem. Soc., 113(1), 86 (1966).
C.J. Brinker, A.J. Hurd, G.C. Frye, K.J. Ward, and C.S. Ashley, J. Non-Cryst. Solids, 121(1–3), 294 (1990).
C.C. Chen, M.M. Nasrallah, and H.U. Anderson, J. Electrochem. Soc., 140(12),3555 (1993).
C.J. Brinker, G.C. Frye, A.J. Hurd, and C.S. Ashley, Thin Solid Films, 201(1), 97 (1991).
J.M. Mochel, US Patent 2,564,707 (1951).
J.E. Hill and R.R. Chamberlin, US Patent 3,148,084 (1964).
A.R. Balkenende, A. Bogaerts, J.J. Scholtz, R.R.M. Tijburg, and H.X. Willems, Philips Journal of Research, 50(3–4), 365(1996).
S.P.S. Arya and H.E. Hintermann, Thin Solid Films, 193(1–2), 841 (1990).
C.H. Chen, E.M. Kelder, P.J.J.M. van der Put, and J. Schoonman, J. Mater. Chem., 6(5), 765 (1996).
J.B. Mooney and S.B. Radding, Annu. Rev. Mater. Sci., 12, 81 (1982).
M.S. Tomar and F.J. Garcia, Progress in Crystal Growth and Characterization of Materials, 4(3), 221 (1981).
D.S. Albin and S.H. Risbud, Advanced Ceramic Materials, 2(3A), 243 (1987).
B.R. Pamplin, Progress in Crystal Growth and Characterization of Materials, 1(4), 395 (1979).
P.S. Patil, Mater. Chem. Phys., 59(3), 185 (1999).
P. Bohac and L.J. Gauckler, in Oxygen Ion and Mixed Conductors and their Technological Applications, edited by H.L. Tuller, J. Schoonman, and I. Riess (Kluwer Academic Publishers, Dordrecht, 2000), p. 271.
H.H. Afify, S.A. Nasser, and S.E. Demian, J. Mater. Sci.: Materials in Electronics, 2(3), 152 (1991).
S. Mirzapour, S.M. Rozati, M.G. Takwale, B.R. Marathe, and V.G. Bhide, J. Mater. Sci., 29(3), 700 (1994).
N.H.J. Stelzer and J. Schoonman, J. Materials Synthesis and Processing, 4(6), 429 (1996).
C.H. Chen, E.M. Kelder, and J. Schoonman, J. Eur. Ceram. Soc., 18, 1439 (1998).
M. Okuya, S. Kaneko, K. Hiroshima, I. Yagi, and K. Murakami, J. Eur. Ceram. Soc., 21(10–11), 2099 (2001).
H. Gourari, M. Lumbreras, R. Van Landschoot, and J. Schoonman, Sensors and Actuators B, 47(1–3), 189 (1998).
H. Gourari, M. Lumbreras, R. Van Landschoot, and J. Schoonman, Sensors and Actuators B, 58(1–3), 365 (1999).
F. Caillaud, A. Smith, and J.F. Baumard, J. Amer. Ceram. Soc., 76(4), 998 (1993).
H. Pink, L. Treitinger, and L. Vite, Jpn. J. Appl. Phys., 19(3), 513 (1980).
V. Vasu and A. Subrahmanyam, Thin Solid Films, 193 (1–2), 973 (1990).
T.M. Racheva, I.D. Stambolova, and T. Donchev, J. Mater. Sci., 29(1), 281 (1994).
S.G. Kim, K.H. Choi, J.H. Eun, H.J. Kim, and C.S. Hwang, Thin Solid Films, 377, 694 (2000).
A.A. Rizkalla and A.H. Lefebvre, J. Eng. Power, 97(2), 173 (1975).
C.M. Lampkin, Progress in Crystal Growth and Characterization of Materials, 1(4), 405 (1979).
R. Rajan and A.B. Pandit, Ultrasonics, 39(4), 235 (2001).
A.M. Ganan-Calvo, J. Davila, and A. Barrero, J. Aerosol Sci., 28(2), 249 (1997).
C. Pantano, A.M. Ganan-Calvo, and A. Barrero, J. Aerosol Sci., 25(6), 1065 (1994).
F.R.S. Rayleigh, Phil. Magazine, 14, 184 (1882).
J. Zeleny, The Physical Review, 3(2), 69 (1914).
J.M. Grace and J.C.M. Marijnissen, J. Aerosol Sci., 25(6), 1005 (1994).
M. Cloupeau and B. Prunet-Foch, J. Electrostatics, 25(2), 165 (1990).
W.M. Sears and M.A. Gee, Thin Solid Films, 165(1), 265 (1988).
W. Siefert, Thin Solid Films, 120(4), 267 (1984).
H.F. Yu and W.H. Liao, Int. J. Heat and Mass Transfer, 41(8–9), 993 (1998).
I.W. Lenggoro, T. Hata, F. Iskandar, M.M. Lunden, and K. Okuyama, J. Mater. Res., 15(3), 733 (2000).
E.K. Oh and S.G. Kim, J. Aerosol Sci., 27(8), 1143 (1996).
J.C. Viguie and J. Spitz, J. Electrochem. Soc., 122(4), 585(1975).
K.L. Choy and B. Su, Thin Solid Films, 388(1–2), 9 (2001).
T. Kosugi and S. Kaneko, J. Amer. Ceram. Soc., 81(12), 3117 (1998).
O. Stryckmans, T. Segato, and P.H. Duvigneaud, Thin Solid Films, 283(1–2), 17 (1996).
H.M. Ismail, Powder Technology, 85(3), 253 (1995).
H.B. Wang, C.R. Xia, G.Y. Meng, and D.K. Peng, Materials Letters, 44(1), 23 (2000).
Y. Matsuzaki, M. Hishinuma, and I. Yasuda, Thin Solid Films, 340(1–2), 72 (1999).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Perednis, D., Gauckler, L.J. Thin Film Deposition Using Spray Pyrolysis. J Electroceram 14, 103–111 (2005). https://doi.org/10.1007/s10832-005-0870-x
Received:
Revised:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10832-005-0870-x