Abstract
A rigid-plastic model of shearing chip formation is proposed. The model is based on the Mohr-Coulomb yield criterion and allows one to determine the size of chipped elements in orthogonal cutting of plastic and brittle metals.
Similar content being viewed by others
REFERENCES
M. E. Merchant, “Mechanics of the metal cutting process,” J. Appl. Phys., 16, No.6, 267–275 (1954).
N. N. Zorev, Some Issues of Metal Cutting Mechanics [in Russian], Mashgiz, Moscow (1956).
M. I. Klushin, Cutting of Metals [in Russian], Mashgiz, Moscow (1956).
E. Thomsen, Ch. Yang, and Sh. Kobayashi, Mechanics of Plastic Deformation in Metal Processing, The Macmillan Company, New York (1965).
Yu. G. Kabaldin, A. I. Oleinikov, A. M. Shpilev, et al., Mathematical Modeling of Self-Organized Processes in Engineering Systems of Cutting Processing [in Russian], Dal’nauka, Vladivostok (2000).
Yu. G. Egorova, S. A. Kaverzina, and A. I. Khromov, “Cutting and failure of ideal rigid-plastic bodies, ” Dokl. Ross. Akad. Nauk, 385, No.4, 490–493 (2002).
V. V. Sokolovskii, Theory of Plasticity [in Russian], Vysshaya Shkola, Moscow (1969).
A. M. Kovrizhnykh, “Plastic deformation of hardening materials under complex loading,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 4, 140–146 (1986).
A. M. Kovrizhnykh, “The question of metal imbrittlement in plastic deformation,” J. Appl. Mech. Tech. Phys., 30, No.6, 994–1001 (1989).
Author information
Authors and Affiliations
Additional information
__________
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 4, pp. 179–186, July– August, 2005.
Rights and permissions
About this article
Cite this article
Kovrizhnykh, A.M. Rigid-Plastic Model of Chipping During Metal Cutting. J Appl Mech Tech Phys 46, 609–614 (2005). https://doi.org/10.1007/s10808-005-0114-5
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/s10808-005-0114-5