Abstract
For uniaxial tension of St. 3 steel, the stiffness-matrix components are determined using a two-dimensional plastic solid model and taking into account the formation and development of anisotropic damage. In order to characterize defect formation, a vector damage criterion is introduced, mictrostructural analysis data are used, and the destruction point is established. Estimates of the elastic moduli and experimental data indicate that the model provides a qualitative description of the real deformation and failure processes of deforming and destruction and can be used to determine the life of materials.
Similar content being viewed by others
REFERENCES
J. Lemaitre, A Course on Damage Mechanics, Springer-Verlag, Berlin (1992).
Zh. S. Erzhanov, K. K. Kaidarov, and V. P. Matveeva, “Mathematical justification of a computational model for a mountain massif with an ordered system of cracks,” in: Modern Problems of Rock Mechanics [in Russian], Nauka, Leningrad (1972). pp. 45–52.
S. B. Batdorf and B. A. Budiansky, “Mathematical theory of plasticity based on the concept of slip, ” Tech. Note No. 1871, NACA (1949)
A. N. Stroh, “The formation of cracks as a result of plastic flow,” Proc. Roy. Soc. Ser. A, 223, No.1154, 404–414 (1954).
V. D. Klyushnikov, “New concepts in plasticity and deformation theory,” Prikl. Mat. Mech., 23, No.4, 722–731 (1959).
A. V. Berezin, Effect of Damage on the Strain and Strength Characteristics of Solids [in Russian], Nauka, Moscow (1990).
A. V. Berezin, “Uniaxial deformation of a plastic solid with allowance for formation and growth of microcracks,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 5, 69–75 (1977).
R. Talreja, Fatigue of Composite Materials, Technomic Publ. Co., Lancaster, Basel (1987).
R. E. Rowlands, “Flow and failure of biaxially loaded composites: Experimental-theoretical correlation, ” in: Inelastic Behavior of Composite Materials, ASME, New York (1975).
A. V. Berezin, “Deformation of defect materials,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 6, 124–130 (1982).
P. G. Cheremskoi, V. V. Slezov, and V. I. Betekhtin, Pores in Solids [in Russian], Energoatomizdat, Moscow (1990).
L. M. Rybakova, “Mechanical regularities in the destruction of metals under volume and surface plastic deformation,” in: Problems of Engineering and Reliability of Machines (collected scientific papers) [in Russian], No. 5 (1998), pp. 113–123.
A. V. Berezin, A. I. Kozinkina, and L. M. Rynakova, “Acoustic emission and destruction of a plastically deformed metal,” Defektoskopiya, No. 3, 9–14 (2004).
Author information
Authors and Affiliations
Additional information
__________
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 4, pp. 154–160, July– August, 2005.
Rights and permissions
About this article
Cite this article
Kozinkina, A.I. Strain Characteristics of Materials with Defects. J Appl Mech Tech Phys 46, 588–593 (2005). https://doi.org/10.1007/s10808-005-0112-7
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/s10808-005-0112-7