Abstract
A very common material for food packaging is steel, in the form of metallic containers (cans), in particular for beverage packaging. The corrosion degradation of the packaging must be carefully controlled, not only because the packaging integrity must be preserved, but also in order to avoid any significant contamination of the food or drink, compromising the flavour. In order to increase the coating performance and the food compatibility, new organic coatings are under development with very high protective properties, with the final aim to increase the shelf life of the product. An electrochemical characterisation is often used to study the protective performance of organic coatings on metal substrate for various applications. Some different coatings for food packaging were considered in the present study, including materials with different chemical composition and different pigments content. The protective properties were quantified using electrochemical impedance spectroscopy (EIS) measurements, comparing the electrochemical substrate activity with electrochemical noise (EN) and scanning Kelvin probe (SKP) measurements. The influence of mechanical deformations on the protective properties was also investigated. The results obtained on the studied coatings confirmed the validity of the electrochemical approach and showed that, in general, the coatings containing pigments (TiO2) have better performance than clearcoats, while comparing the different polymers, epoxy–phenolic coatings have a better corrosion protection than epoxy–melamine coatings.
Similar content being viewed by others
References
Robertson GL (2006) Food packaging: principles and practice. CRC Press/Taylor and Francis, London
Bernardo PEM, dos Santos JLC, Costa NG (2005) Prog Org Coat 54:34
Montanari A, Pezzani A, Cassarà A, Quaranta A, Lupi L (1996) Prog Org Coat 29:159
Català R, Cabanes JM, Bastidas JM (1998) Corros Sci 40:1455
Bonora PL, Deflorian F, Fedrizzi L (1996) Electrochim Acta 41:1073
DeWit JHW (1995) In: Marcus P, Oudar G (eds) Corrosion mechanisms in theory and practice. Marcel Dekker, New York
Marcus P, Mansfeld F (eds) (2006) Analytical methods in corrosion science and engineering. Taylor and Francis, London
Mojica J, Garcia E, Rodriguez FJ, Genescá J (2001) Prog Org Coat 42:218
Rohwerder M, Turcu F (2007) Electrochim Acta 53:290
Sekine I, Suzuki T et al (1997) Prog Org Coat 31:185
Barilli F, Fragni R, Gelati S, Montanari A (2003) Prog Org Coat 46:91
Bovard FS, Burleigh TD, Smith AT (1995) Electrochim Acta 40:201
Doherty M, Sykes JM (2004) Corr Sci 46:1265
Boukamp B (1986) Solid State Ionics 20:31
Deflorian F, Fedrizzi L, Rossi S, Bonora PL (1999) Electrochim Acta 44:4243
Brasher DM, Kingsbury AH (1954) J Appl Chem 4:62
Amirudin A, Thierry D (1995) Prog Org Coat 26:1
Dawson JL (1996) Electrochemical noise measurements for corrosion applications. ASTM STP 1277, West Conshohoken, PA
Le Thu Q, Bierwagen GP, Touzain S (2001) Prog Org Coat 42:179
Acknowledgements
We would like to thank PPG Allison Park (USA), and in particular Dr. Peter Kamarchik for samples preparation and Prof. Francisco X. Rodriguez from UNAM (Mexico City) for the useful discussions about the electrochemical noise data.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Deflorian, F., Rossi, S., Vadillo, M.d.C. et al. Electrochemical characterisation of protective organic coatings for food packaging. J Appl Electrochem 39, 2151–2157 (2009). https://doi.org/10.1007/s10800-009-9818-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10800-009-9818-1