Abstract
To study the effect of WC particles on corrosion behaviour of chromium coating steel samples were plated in Cr(VI) baths with various concentrations of WC. XPS, EPM and XRD were used to study the chemical composition, morphology and texture of the coatings. The corrosion behaviour was studied at different exposure times in solution containing 0.01 mol L−1 H2SO4 + 0.5 mol L−1 Na2SO4 using cyclic voltammetry and impedance spectroscopy. Cyclic polarization measurements suggest that WC particles slow down the processes of passive film dissolution and penetration of aggressive ions to the substrate. Electrochemical impedance spectroscopy (EIS) was used to reveal the details of the corrosion process at the solution/electrode interface. The simulation of EIS data with a proposed equivalent circuit model made it possible to obtain quantitative valuation of the Y0 (Qc), Y0 (Qs) and Rpore parameters, reflecting corrosion behaviour of samples at the solution/electrode interface. Samples plated in a Cr(VI) bath with WC provided better resistance to corrosion than those plated in a bath without WC. Analysis of the data obtained suggests that WC particles enhance corrosion resistance due to the microstructural features of the coatings.
Similar content being viewed by others
References
R.S. Saifullin (1991) ‘Physical Chemistry of Inorganic Polymer and Composite Materials’ Horwood Chichester UK
S. Surviliene S. Bellozor M. Kurtinaitiene V.A. Safonov (2004) Surf. Coat. Technol. 176 193
F. Mansfeld (1995) J. Appl. Electrochem. 25 187
C. Liu Q. Bi A. Matthews (2001) Corros. Sci. 43 1953
C. Liu Q. Bi A. Leyland A. Matthews (2003) Corros. Sci. 45 1243
J.R. Scully S.T. Hensley (1994) Corrosion 50 705
M.A. Mickus, S.P. Surviliene, S.Y Juknevichius and B.A. Shalkus, A.S. USSR No. 1425257. Bul. Izobretinii, 35, 1988 (in Russian).
International Standard ISO 4540. Metallic coatings - Coatings cathodic to the substrate. Rating of electroplated test specimens subjected to corrosion tests. 1980.
D. Briggs M.P. Seach (Eds) (1983) Practical Surface Analysis by Auger and X-ray Photoelectron Spectroscopy Wiley Chichester, UK
C.D. Wagner W.M. Riggs L.E. Davis J.F. Moulder G.E. Muilenberg (Eds) (1978) Handbook of X-ray Photoelectron Spectroscopy Perkin-Elmer Minneapolis, MN 190
B.A Boukamp (1995) J. Electrochem. Soc. 142 1885
R.Y. Tsai Sh.-T. Wu (1989) J.Electrochem. Soc 136 IssueID5 1341
L.Ph. Berube G. Esperance (1989) J.Electrochem. Soc. 136 2314
A.A. Edigaryan V.A. Safonov E.N. Lubnin L.N. Vykhodtseva G.E. Chusova Yu.M. Polukarov (2002) Electrochim. Acta, 47 2775
S. Surviliene S. Bellozor V.A. Safonov (2002) Bull. Electrochem. 18 391
V. Maurice W.P. Yang P. Marcus (1994) J. Electrochem. Soc. 141 3016
T.P. Moffat R.M. Latanision (1992) J. Electrochem. Soc. 139 1869
M. Bojinov G. Fabricius T. Laitinen T. Saario (1998) J. Electrochem. Soc. 145 2043
M. Bojinov G. Fabricius T. Laitinen T. Saario G. Sundholm (1998) Electrochim. Acta 44 247
L. van Leaven M.N. Alias R. Brown (1992) Surf. Coat. Technol. 53 25–34
C.H. Tsai F. Mansfeld (1993) Corros 49 IssueID9 726
C. Wagner W. Traud (1938) Z. Elektrochem. 44 391
M. Stern A.L. Geary (1957) J. Electrochem. Soc. 104 56
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Surviliene, S., Jasulaitiene, V., Lisowska-Oleksiak, A. et al. Effect of WC on electrodeposition and corrosion behaviour of chromium coatings. J Appl Electrochem 35, 9–15 (2005). https://doi.org/10.1007/s10800-004-1760-7
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10800-004-1760-7