Abstract
A two dimensional saturated-unsaturated Galerkin finite element numerical model was used to predict water table height between parallel drains. A user-friendly software (DRENAFEM) was developed to allow for the calculation of the distance between drains and the water table height at middle space between drains. It also allows for determination of variations of the total head throughout the entire geometric space considered in the model. Such facts lead to the design of flow nets with streams lines and equipotentials. The numerical drain outflow is also obtained by using the radial flow equation, conservation of mass and finite element analysis. The results obtained with the model agree well with Khirkam’s and Hooghoudt analytical solution for the distribution of total head in ideal drains and for the total head calculations midway between drains.
References
Desai C (1972) Seepage analysis of earth banks under drawdown. J Soil Mech Found Div 98:1143–1161
Fipps G, Skaggs R (1986) Drain as a boundary condition in finite elements. Water Resour Res 22(11):1613–1621
France P, Parekh C, Peters J, Taylor C (1971) Numerical analysis of free surface seepage problems. J Irrig Drain Div 97:165–179
Gureghian A, Youngs E (1975) The calculation of steady state water table heights in drained soils by means of the finite-element method. J Hydrol (Amst) 27:15–32. doi:10.1016/0022-1694(75)90096-7
Kirkham D (1966) Steady state theories for drainage. J Irrig Drain Div 92:19–39
Kirkham D, Toksoz S, Ploeg R (1974) Steady flow to drains and wells. In Drainage for Agriculture, editado por Van Shilfgaarde, ASA, Agronomy series 17
Neuman S (1973) Saturated-unsaturated seepage by finite elements. J. Hydraul Div. A.S.C.E. 99(HY 12):2233–2250
Pan L, Warrick A, Wierenga J (1996) Finite element methods for modelling water flow in variably saturated porous media: numerical oscillation and mass-distributed schemes. Water Resour Res 32(6):1883–1889. doi:10.1029/96WR00753
Simunek J, Huang K, van Genucthen MT (1995) The SWMS_3D code for simulating water flow and solute transport in three dimensional variably saturated media. Research report n 139, U.S. Salinity Laboratory. Riverside. USA
Simunek J, Sejna M, van Genuchten M (1999) The HYDRUS2D software package for simulating the two dimensional movement of water, heat and múltiple solutes in variably saturated media. U.S. Salinity laboratory, Riverside, California
Tarboton K, Wallender P (2000) Finite element grid configurations for drains. J Irrig Drain Eng 126(4):243–249. doi:10.1061/(ASCE)0733-9437(2000)126:4(243)
Townley LR (1990) AQUAFEM-N: a multi-layered finite element aquifer flow model, users manul and description. CSIRO division of water resources, Pert
van Genucthen M (1980) A closed form equation for predicting the hydraulic conductivity of unsaturated soils. Soil Sci Soc Am J 44:892–898
Vimoke B, Taylor G (1962) Simulating water flow in soil with an electric resistance network. ARS. USDA 41–65
Yeh G (1999) Computational subsurface hydrology–fluid flows. Kluwer Academic, USA
Zaradny H, Feddes R (1979) Calculation of non steady flow towards a drain in saturated unsaturated soil by finite elements. Agric Water Manag. Elsevier S. P. 2:37–53
Acknowledgements
This work was supported by funds provided by project POCTI/32847/AGR/Fundação para Ciência e Tecnologia/Portugal.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Castanheira, P.J., Santos, F.L. A simple numerical analyses software for predicting water table height in subsurface drainage. Irrig Drainage Syst 23, 153–162 (2009). https://doi.org/10.1007/s10795-009-9079-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10795-009-9079-5