A refined statement and methodology for solving the problem of electrothermomechanical behavior and predicting the durability of inelastic shells of revolution with piezoelectric sensors and actuators during axisymmetric resonant vibrations are presented. Transverse shear strains, rotational inertia, and temperature dependence of the electromechanical properties of materials are taken into account. The effect of these factors on the frequency dependence of the amplitudes of the deflections, self-heating temperature, and the voltage of the piezosensor for a cylindrical shell is analyzed numerically. The dependence of the service life of the system on the extreme amplitudes of the mechanical load and the heat removal conditions is analyzed by assessing the local durability from the maximum permissible heating temperature.
Similar content being viewed by others
References
A. F. Bulat, V. I. Dyrda, E. L. Zvyahil’skyi, and A. E. Markelov, Strength and Fracture of Rubber Parts of Production Machines [in Russian], Naukova Dumka, Kyiv (2010).
Ya. M. Grigorenko, A. T. Vlaikov, and A. Ya. Grigorenko, Numerical and Analytical Solution of Shell Problems Based on Various Models [in Russian], Akademperiodika, Kyiv (2006).
V. G. Karnaukhov and I. F. Kirichok, Coupled Problems for Viscoelastic Plates and Shells [in Russian], Naukova Dumka, Kyiv (1986).
V. G. Karnaukhov and V. V. Mikhailenko, Nonlinear Thermomechanics of Piezoelectric Inelastic Bodies under Monoharmonic Loading [in Russian], ZhGTU, Zhytomyr (2005).
N. P. Nesterenko, O. P. Chervinko, and I. K. Senchenkov, “Modeling ultrasonic heating in structural elements of polymeric fibrous composites under normal loading,” Vest. Nats. Tekhn. Univ. “KhPI,” No. 9, 3–8 (2002).
A. I. Shinkar’, A. B. Kitaigorodskii, and S. K. Borshchevskaya, “Solving linear boundary value problems for systems of ordinary differential equations,” in: Algorithms and Programs for Solving Problems of Solid Mechanics [in Russian], Naukova Dumka, Kyiv (1976), pp. 157–170.
A. Blaguenon, F. Lene, and M. Bernadou, “Active control of a beam using a piezoceramic element,” Smart Mater. Struct., No. 8, 116–124 (1999).
A. M. Bolkisev, V. L. Karlash, and N. A. Shul’ga, “Temperature dependence of the properties of piezoeleñtric ceramics,” Sov. Appl. Mech., 20, No. 7, 650–653 (1984).
U. Gabbert and H. S. Tzou, Smart Structures and Structronic Systems, Kluwer Academic Publishers, Dordrecht (2001).
V. G. Karnaukhov, I. F. Kirichok, and V. I. Kozlov, “Electromechanical vibrations and dissipative heating of viscoelastic thin-walled piezoelements (review),” Int. Appl. Mech., 37, No. 2, 182–212 (2001).
V. G. Karnaukhov, I. F. Kirichok, and V. I. Kozlov, “Thermomechanics of inelastic thin-wall structural members with piezoelectric sensors and actuators under harmonic loading (review),” Int. Appl. Mech., 53, No. 1, 6–58 (2017).
V. G. Karnaukhov, V. I. Kozlov, and T. V. Karnaukhova, “Parametric vibrations of a hinged termoviskoelastic rectangular piezoelectric plate with shear strains and dissipative heating taken into account,” Int. Appl. Mech., 56, No. 3, 334–339 (2020).
A. Katunin, “Criticality of the self-heating effect in polymers and polymer matrix composites during fatigue and their application in non-destructive testing,” Polymers, 11, No. 1, 1–19 (2018).
A. Katunin and M. Fidali, “Fatigue and thermal failure of polymeric composites subjected to cyclic heating,” Adv. Compos. Lett., No. 21, 64–69 (2012).
I. F. Kirichok, “Resonant axisymmetric vibrations and vibrational heating of a viscoelastic cylindrical shell with piezolayers subject to elektromechanical excitation,” Int. Appl. Mech., 51, No. 5, 567–573 (2015).
I. F. Kirichok and O. A. Cherniushok, “Forced vibration and self-heating of a flexible viscoelastic beam with piezoelectric sensor and actuator with account of shear strain,” Int. Appl. Mech., 54, No. 5, 568–576 (2018).
I. F. Kirichok and O. A. Cherniushok, “Axisymmetrical vibrations and vibroheating of a thermoviscoelastic cylindrical shell with piezoactuators and shear deformation taken into account,” Int. Appl. Mech., 56, No. 3, 340–346 (2020).
I. F. Kirichok and O. A. Cherniushok, “Forced vibration and self-heating of a thermoviscoelastic cylindrical shear compliant shell with piezoelectric actuators and sensors,” Int. Appl. Mech., 56, No. 6, 723–731 (2020).
H. S. Tzou, Piezoelectric Shells (Distributed Sensing and Control of Continua), Kluwer, Dordrecht (1993).
H. S. Tzou and L. A. Bergman, Dynamics and Control of Distributed Systems, Cambridge University Press, Cambridge (1998).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prykladna Mekhanika, Vol. 58, No. 2, pp. 70–80, March–April 2022.
This study was sponsored by the budget program “Support for Priority Areas of Scientific Research” (KPKVK 6541230).
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Kirichok, I.F., Cherniushok, O.A. Thermomechanical Behavior and Durability of Shear-Compliant Inelastic Shells of Revolutionwith Piezo-Electric Pads During Axisymmetric Resonant Vibrations. Int Appl Mech 58, 180–188 (2022). https://doi.org/10.1007/s10778-022-01145-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-022-01145-2