The Fourier–Legendre series expansion and the boundary-shape perturbation method are used to determine the stress state of an unbounded transversely isotropic plate with a curved hole under constant shear forces at infinity. The numerical results obtained are analyzed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
I. N. Vekua, “Theory of thin shallow variable-thickness shells,” Trudy Tbiliss. Mat. Inst., 30, 3–103 (1965).
A. N. Guz and Yu. N. Nemish, Boundary Shape Perturbation Method in Solid Mechanics [in Russian], Vyshcha Shkola, Kyiv (1989).
A. N. Guz, I. S. Chernyshenko, V. N. Chekhov, et al., Theory of Thin Shells Weakened by Holes, Vol. 1 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kyiv (1980).
D. V. Kushnir and L. A. Fil’shtinskii, “Harmonic and pulse excitations of multiply connected cylindrical bodies,” J. Appl. Math. Mech., 70, No. 2, 274–283 (2006).
D. I. Bardzokas, D. V. Kushnir, and L. A. Fil’shtinskii, “Dynamic problems of the theory of elasticity for layers and semilayers with cavities,” Acta Mech., 208, 81–95 (2009).
E. E. Burniston, “On the extension of an infinite elastic plate containing an axisymmetric hole,” J. Appl. Mech., 39, No. 2, 507–512 (1972).
F. Darwish, M. Gharaiben, and G. Toshtoush, “A modified equation for the stress concentration countersunk holes,” Eur. J. Mech., A/Solids, 36, 94–103 (2012).
J. I. Fellers and A. I. Soler, “Approximate solution of the finite cylinder problem using Legendre’s polynomials,” AIAA J., 8, No. 11, 2037–2042 (1970).
E. S. Folias and J. S. Wang, “On the three-dimensional stress fields around a circular hole in a plate of arbitrary thickness,” Comp. Mech., 6, No. 5, 379–391 (1990).
A. E. Green, “Three-dimensional stress systems in isotropic plates,” Phil. Trans., Royal Soc. of London, Ser. A, 240, No. 285, 561–597 (1948).
I. Yu. Khoma, “Tension of a nonthin transversely isotropic plate with a noncircular cylindrical cavity,” Int. Appl. Mech., 42, No. 11, 1285–1297 (2006).
I. Yu. Khoma, “Representing the solutions of the equilibrium equations for functionally inhomogeneous transversely isotropic plates,” Int. Appl. Mech., 53, No. 2, 196–208 (2017).
I. Yu. Khoma and O. G. Dashko, “Stress state of a nonthin transversely isotropic plate with a curved hole,” Int. Appl. Mech., 51, No. 4, 461–473 (2015).
I. Yu. Khoma and T. M. Proshchenko, “Tension and shear of a transversely isotropic piezoceramic plate with a circular hole with mixed conditions on flat sides,” Int. Appl. Mech., 53, No. 6, 704–715 (2017).
I. Yu. Khoma and T. M. Proshchenko, “The stress state of a transversely isotropic plate with a curvilinear hole for a given splitting force on the boundary surface,” Int. Appl. Mech., 55, No. 4, 434–449 (2019).
J. Rezaeepazhand and M. Jafari, “Stress concentration in metallic plates with special shaped cutout,” Int. J. Mech. Sci., 52, No. 1, 96–102 (2010).
Zh. Yang, “The stress and strain concentrations of an elliptical hole in an elastic plate of finite subjected to tensile stress,” Int. J. Fract., 155, 43–44 (2009).
Zh. Yang, Kim Ch-Boo, Ch. Chjo, and N. G. Beom, “The concentration of stress and strain in finite thickness elastic plate containing a circular hole,” Int. J. Solids Struct., 45, 713–731 (2008).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 57, No. 1, pp. 88–99, January–February 2021.
Rights and permissions
About this article
Cite this article
Khoma, I.Y., Proshchenko, T.M. Stress State of a Transversely Isotropic Plate with a Curved Hole Under Simple Shear at Infinity. Int Appl Mech 57, 75–85 (2021). https://doi.org/10.1007/s10778-021-01058-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-021-01058-6