The problem of the stress state of an infinite transversely isotropic piezoceramic plate with a circular hole with mixed boundary conditions at the edges is solved. The plate is subject to tension and shear at infinity. The method of expanding the unknown functions into Fourier–Legendre series is used. The stress state near the hole is analyzed.
Similar content being viewed by others
References
E. V. Altukhov, “Elastic equilibrium of a layer with a cavity with mixed boundary conditions at the edges,” Teor. Prikl. Mekh., 24, 3–7 (1993).
I. N. Vekua, “Theory of thin shallow shells of variable thickness,” Tr. Tbilis. Mat. Inst., 30, 3–103 (1965).
W. Nowacki, Electromagnetic Effects in Solids [in Polish], PWN, Warsaw (1983).
I. Yu. Khoma, “Thermopiezoelectric equations for nonthin ceramic shells,” Int. Appl. Mech., 41, No. 2, 118–128 (2005).
L. A. Fil’shtinskii and D. V. Kushnir, “Elastic equilibrium of multiply connected cylindrical bodies,” Teor. Prikl. Mekh., 45, 90–99 (2009).
P. Bisegna and G. Caruso, “Evalution of higher-order theories of piezoelectric plates in bending and in stretching,” Int. J. Solids Struct., 38, No. 4, 48–49 (2001).
E. E. Burniston, “On the extension of an infinite elastic plate containing an axisymmetric hole,” J. Appl. Mech., 39, No. 2, 507–512 (1972).
Cheng Zhen-Qiang, C. W. Lim, and S. Kitipornchai, “Three-dimensional asymptotic approach to inhomogeneous and laminated piezoelectric plates,” Int. J. Solids Struct., 37, No. 33, 3153–3175 (2000).
F. Darwish, M. Gharaibeh, and G. Toshtoush, “A modefied equation for the stress concentration countersunk holes,” Eur. J. Mech. A/Solids, 36, 94–103 (2012).
J. I. Fellers and A. I. Soler, “Approximate solution of the finite cylinder problem using Legendre polynomials,” AIAA J., 8, No. 11, 2037–2042 (1970).
E. S. Folias and J. S. Wang, “On the three-dimensional stress fields around a circular hole in a plate of arbitrary thickness,” Comp. Mech., 6, No. 5, 379–391 (1990).
S. Kapuria, G. P. Dube, and P. C. Dumir, “First-order shear deformation theory solution for a circular piezoceramic composite plate under axisymmetric load,” Smart Mater. Struct., 12, No. 3, 417–423 (2003).
I. Yu. Khoma, “Representation of the solution of the equilibrium equations for non-thin transversely isotropic plates,” J. Math. Sci., 101, No. 6, 3577–3584 (2000).
I. Yu. Khoma, “Analytical solution of the equilibrium equations for nonthin electroelastic transversely isotropic plates polarized through the thickness,” Int. Appl. Mech., 50, No. 4, 430–445 (2014).
I. Yu. Khoma, “Representing the solutions of equilibrium equations for functionally inhomogeneous transverselly isotropic plates,” Int. Appl. Mech., 53, No. 2, 196–208 (2017).
I. Yu. Khoma and O. G. Dashko, “Stress state of a nonthin transversely isotropic plate with a curvilinear hole,” Int. Appl. Mech., 51, No. 4, 461–473 (2015).
I. Yu. Khoma and O. G. Dashko, “Solving the third homogeneous boundary-value problem of the deformation of a transverselly isotropic plate with a curved hole under uniform tension,” Int. Appl. Mech., 52, No. 6, 605–615 (2016).
Lee Ho-Jun and D. A. Saravanos, “Mixed multi-field finite element formulation for thermopiezoelectric composite shells,” Int. J. Solids Struct., 37, No. 36, 4944–4967 (2000).
J. S. Yang, “Equation of the extension and flexure of electroelastic plates under strong electric fields,” Int. J. Solids Struct., 36, No. 21, 3171–3192 (1999).
Zh. Yang, Kim Ch-Boo, Ch. Chjo, and N. G. Beom, “The concentration of stress and strain in finite thickness elastic plate containing a circular hole,” Int. J. Solids Struct., 45, 713–731 (2008).
Zh. Yang, “The stress and strain concentrations of an elliptical hole in an elastic plate of finite subjected to tensile stress,” Int. J. Fract., 155, 43–44 (2009).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 53, No. 6, pp. 108–120, November–December, 2017.
Rights and permissions
About this article
Cite this article
Khoma, I.Y., Proshchenko, T.M. Tension and Shear of a Transversely Isotropic Piezoceramic Plate with a Circular Hole with Mixed Conditions on Flat Sides. Int Appl Mech 53, 704–715 (2017). https://doi.org/10.1007/s10778-018-0852-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-018-0852-8