The elastoplastic state of thin conical shells with a circular hole is analyzed assuming finite deflections. The distributions of stresses, strains, and displacements along the hole boundary and in the zone of their concentration are studied. The stress–strain state of shells around the hole under axial tension is analyzed taking into account two nonlinear factors. The numerical results are presented as plots and tables
Similar content being viewed by others
References
A. N. Guz, P. Z. Lugovoi, and N. A. Shul’ga, Conical Shells Weakened by Openings [in Russian], Naukova Dumka, Kyiv (1976).
A. N. Demidov, ”Elastoplastic state of thin shells of arbitrary shape with rectangular holes,” Prikl. Mekh., 17, No. 8, 110–113 (1981).
I. P. Ermakovskaya, ”Effect of physical nonlinearity and orthotropy on the stress distribution around holes in a conical shell,” Int. Appl. Mech., 27, No. 10, 995–1000 (1991).
A. N. Guz, I. S. Chernyshenko, V. N. Chekhov, et al., Theory of Thin Plates Weakened by Holes, Vol. 1 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kyiv (1980).
A. N. Guz (ed.), Stress Concentration, Vol. 7 of the 12-volume series Mechanics of Composite Materials [in Russian], A.S.K., Kyiv (1988).
I. S. Chernyshenko, E. A. Storozhuk, and S. B. Kharenko, ”Elastoplastic state of flexible cylindrical shells with a circular hole under axial tension,” Int. Appl. Mech., 44, No. 7, 802–809 (2008).
I. S. Chernyshenko, E. A. Storozhuk, and S. B. Kharenko, ”Physically and geometrically nonlinear deformation of conical shells with an elliptic hole,” Int. Appl. Mech., 44, No. 2, 174–181 (2008).
I. S. Chernyshenko, E. A. Storozhuk, and S. B. Kharenko, ”Physically and geometrically nonlinear deformation of thin-walled conical shells with a curvilinear hole,” Int. Appl. Mech., 43, No. 4, 418–424 (2007).
A. N. Guz, I. S. Chernyshenko, and K. I. Shnerenko, ”Stress concentration near openings in composite shells,” Int. Appl. Mech., 37, No. 2, 139–181 (2001).
A. N, Guz, E. A. Storozhuk, and I. S. Chernyshenko, ”Physically and geometrically nonlinear static problems for thin-walled multiply connected shells,” Int. Appl. Mech., 39, No. 6, 679–687 (2003).
A. N. Guz, E. A. Storozhuk, and I. S. Chernyshenko, ”Nonlinear two-dimensional static problems for thin shells with reinforced curvilinear holes,” Int. Appl. Mech., 45, No. 12, 1269–1300 (2009).
V. A. Maksimyuk, E. A. Storozhuk, and I. S. Chernyshenko, ”Using mesh-based methods to solve nonlinear problems of statics for thin shells,” Int. Appl. Mech., 45, No. 1, 32–56 (2009).
E. A. Storozhuk, and I. S. Chernyshenko, ”Elastoplastic deformation of flexible cylindrical shells with two circular holes under axial tension,” Int. Appl. Mech., 41, No. 5, 506–511 (2005).
E. N. Troyak, E. A. Storozhuk, and I. S. Chernyshenko, ”Elastoplastic state of a conical shell with a circular hole on the lateral surface,” Int. Appl. Mech., 24, No. 1, 65–69 (1988).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 47, No. 6, pp. 86–92, November 2011.
Rights and permissions
About this article
Cite this article
Chernyshenko, I.S., Storozhuk, E.A. & Kharenko, S.B. Elastoplastic state of flexible conical shells with a circular hole under axial tension. Int Appl Mech 47, 679–684 (2011). https://doi.org/10.1007/s10778-011-0491-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-011-0491-9