The paper proposes a method to allow for the stress mode in analyzing the thermoelastoplastic stress-strain state of compound bodies of revolution under asymmetric loading and heating. Use is made of a semianalytic finite-element method and the method of successive approximations. Some numerical results are presented
Similar content being viewed by others
References
S. A. Ambartsumyan, Theory of Bimodulus Elasticity [in Russian], Nauka, Moscow (1982).
V. S. Bondar', Inelasticity: Versions of the Theory [in Russian], Fizmatlit, Moscow (2004).
I. N. Bronshtein and K. A. Semendyaev, Handbook of Mathematics for Engineers and Students [in Russian], Nauka, Moscow (1981).
N. N. Malinin, Applied Theory of Plasticity and Creep [in Russian], Mashinostroenie, Moscow (1975).
Ya. M. Grigorenko, Yu. N. Shevchenko, et al., Numerical Methods, Vol. 11 of the 12-volume series Mechanics of Composite Materials [in Russian], A.S.K., Kyiv (2002).
G. S. Pisarenko, A. P. Yakovlev, and V. V. Matveev, Handbook on Resistance of Materials [in Russian], Naukova Dumka, Kyiv (1988).
V. A. Bazhenov, A. I. Gulyar, A. S. Sakharov, and A. G. Topor, Semianalytic Finite-Element Method in Solid Mechanics [in Russian], NII SM, Kyiv (1993).
Yu. N. Rabotnov, Solid Mechanics [in Russian], Nauka, Moscow (1979).
I. A. Birger and B. F. Shor (eds.), Heat Resistance of Machine Parts [in Russian], Mashinostroenie, Moscow (1975).
V. G. Savchenko and Yu. N. Shevchenko, Three-Dimensional Problems of Thermoviscoplasticity, Vol. 1 of the six-volume series Advances in Mechanics [in Russian], A.S.K., Kyiv (2005).
Yu. N. Shevchenko, Numerical Methods for Solving Applied Problems, Vol. 6 of the six-volume series Three-Dimensional Problems of Elasticity and Plasticity [in Russian], Naukova Dumka, Kyiv (1986).
Yu. N. Shevchenko, M. E. Babeshko, V. V. Piskun, and V. G. Savchenko, Three-Dimensional Problems of Thermoplasticity [in Russian], Naukova Dumka, Kyiv (1980).
Yu. N. Shevchenko and V. G. Savchenko, Thermoviscoplasticity, Vol. 2 of the five-volume series Mechanics of Coupled Fields in Structural Members [in Russian], Naukova Dumka, Kyiv (1987).
Yu. N. Shevchenko, M. E. Babeshko, and R. G. Terekhov, Thermoviscoelastoplastic Processes in Complex Deformation of Structural Members [in Russian], Naukova Dumka, Kyiv (1992).
M. E. Babeshko and V. G. Savchenko, “Method of successive approximations in boundary-value problems of thermoplasticity,” Int. Appl. Mech., 34, No. 3, 232–238 (1998).
M. E. Babeshko and V. G. Savchenko, “Improving the convergence of the additional-strain method in thermoplasticity boundary problems with deformation along small curvature trajectories,” Int. Appl. Mech., 34, No. 8, 771–776 (1998).
M. E. Babeshko and V. G. Savchenko, “Elastoplastic stress-strain state of flexible layered shells made of isotropic and transversely isotropic materials with different moduli and subjected to axisymmetric loading,” Int. Appl. Mech., 43, No. 11, 1208–1217 (2007).
V. G. Savchenko and M. E. Babeshko, “Solution of nonaxisymmetric three-dimensional thermoplasticity problem by the secondary-stress method,” Int. Appl. Mech., 35, No. 12, 1207–1213 (1999).
V. G. Savchenko, “Nonaxisymmttric deformation of solids of revolution made of elastic orthotropic materials with different tensile and compressive moduli,” Int. Appl. Mech., 41, No. 7, 748–756 (2005).
V. G. Savchenko, “Stress state of compound solids of revolution made of damaged orthotropic materials with different tensile and compressive moduli,” Int. Appl. Mech., 42, No. 11, 1246–1255 (2006).
Yu. N. Shevchenko, R. G. Terekhov, and N. N. Tormakhov, “Constitutive equations for describing the elastoplastic deformation of elements of a body along small-curvature paths in view of the stress mode,” Int. Appl. Mech., 42, No. 4, 421–430 (2006).
Yu. N. Shevchenko, R. G. Terekhov, and N. N. Tormakhov, “Linear relationship between the first invariants of the stress and strain tensors in theories of plasticity with strain hardening,” Int. Appl. Mech., 43, No. 3, 291–302 (2007).
Yu. N. Shevchenko, R. G. Terekhov, and N. N. Tormakhov, “Elastoplastic deformation of elements of an isotropic solid along paths of small curvature: Constitutive equations incorporating the stress mode,” Int. Appl. Mech., 43, No. 6, 621–630 (2007).
Author information
Authors and Affiliations
Additional information
Translated from Prikladnaya Mekhanika, Vol. 44, No. 9, pp. 26–35, September 2008.
Rights and permissions
About this article
Cite this article
Savchenko, V.G. A method to study the nonaxisymmetric plastic deformation of solids of revolution with allowance for the stress mode. Int Appl Mech 44, 975–981 (2008). https://doi.org/10.1007/s10778-009-0119-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-009-0119-5