Abstract
The elastoplastic state of cylindrical shells with a circular hole is studied considering finite deflections. The material of the shells is isotropic and homogeneous; the load is axial tension. The distribution of stresses, strains, and displacements along the hole boundary and in the zone of their concentration is studied by solving a doubly nonlinear problem. The data obtained are compared with the solutions of the physically and geometrically nonlinear problems and a numerical solution of the linear elastic problem
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
A. N. Guz, A. G. Makarenkov, and I. S. Chernyshenko, Structural Strength of Solid Propellant Engines [in Russian], Mashinostroenie, Moscow (1980).
A. N. Guz, E. A. Storozhuk, and I. S. Chernyshenko, “Physically and geometrically nonlinear static problems for thin-walled multiply connected shells,” Int. Appl. Mech., 39, No. 6, 679–687 (2003).
A. V. Karmishin, V. A. Lyaskovets, V. N. Myachenkov, and A. N. Frolov, Statics and Dynamics of Thin-Walled Shell Structures [in Russian], Mashinostroenie, Moscow (1975).
A. N. Guz, I. S. Chernyshenko, V. N. Chekhov, et al., Theory of Thin Shells Weakened by Holes, Vol. 1 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kyiv (1980).
A. N. Guz, A. S. Kosmodamianskii, V. P. Shevchenko, et al., Stress Concentration, Vol. 7 of the 12-volume series Mechanics of Composite Materials [in Russian], A.S.K., Kyiv (1998).
E. A. Storozhuk, “Two-dimensional elastoplastic problems in the theory of flexible shells with curvilinear holes,” Int. Appl. Mech., 31, No. 5, 355–359 (1995).
A. P. Shapovalov, “Effect of circular unreinforced holes on the stability of axially loaded cylindrical shells in the elasticoplastic zone,” Strength of Materials, 6, No. 5, 638–643 (1974).
I. S. Chernyshenko and E. A. Storozhuk, “Inelastic deformation of flexible cylindrical shells with a curvilinear hole,” Int. Appl. Mech., 42, No. 12, 1414–1420 (2006).
I. S. Chernyshenko, E. A. Storozhuk, and F. D. Kadyrov, “Inelastic deformation of flexible cylindrical shells with an elliptic hole,” Int. Appl. Mech., 43, No. 5, 512–518 (2007).
I. S. Chernyshenko, E. A. Storozhuk, and S. B. Kharenko, “Physically and geometrically nonlinear deformation of thin-walled conical shells with a curvilinear hole,” Int. Appl. Mech., 43, No. 4, 418–424 (2007).
I. S. Chernyshenko, E. A. Storozhuk, and I. B. Rudenko, “Stress-strain state of a flexible spherical shell with an eccentric circular hole,” Int. Appl. Mech., 43, No. 10, 1142–1148 (2007).
A. N. Guz, I. S. Chernyshenko, and K. I. Shnerenko, “Stress concentration near openings in composite shells,” Int. Appl. Mech., 37, No. 2, 139–181 (2001).
E. A. Storozhuk and I. S. Chernyshenko, “Elastoplastic deformation of flexible cylindrical shells with two circular holes under axial tension,” Int. Appl. Mech., 41, No. 5, 506–511 (2005).
Author information
Authors and Affiliations
Additional information
__________
Translated from Prikladnaya Mekhanika, Vol. 44, No. 7, pp. 101–109, July 2008.
Rights and permissions
About this article
Cite this article
Chernyshenko, I.S., Storozhuk, E.A. & Kharenko, S.B. Elastoplastic state of flexible cylindrical shells with a circular hole under axial tension. Int Appl Mech 44, 802–809 (2008). https://doi.org/10.1007/s10778-008-0094-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-008-0094-2