Abstract
The paper presents experimental results on the deformation, local buckling, and fracture of D16AT plates with two parallel edge cracks under tension. The distribution of strains and deflections over typical cross-sections and buckling modes are determined. The influence of the crack length and the distance between the cracks on the local buckling stresses and breaking stresses is studied. The effect of local buckling on the strength of the plate is evaluated
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
A. N. Guz and M. Sh. Dyshel’, “Deformation of plates with an edge crack in tension,” Int. Appl. Mech., 31, No. 11, 944–480 (1995).
A. N. Guz, M. Sh. Dyshel’, and V. M. Nazarenko, Fracture and Stability of Materials with Cracks, Vol. 4, Book 1 of the four-volume five-book series Nonclassical Problems of Fracture Mechanics [in Russian], Naukova Dumka, Kyiv (1992).
M. Sh. Dyshel’, “Effect of the ductility properties of the material on the stability and fracture of plates with an edge crack,” Int. Appl. Mech., 34, No. 7, 669–672 (1998).
M. Sh. Dyshel’, “Tensile fracture of plates with an edge crack with allowance for preliminary local loss of stability,” Int. Appl. Mech., 32, No. 2, 128–131 (1996).
M. Sh. Dyshel’, “Stability and fracture of plates with a central and an edge cracks under tension,” Int. Appl. Mech., 38, No. 4, 472–476 (2002).
M. Sh. Dyshel’, “Stability of plates with an oblique edge crack under tension,” Int. Appl. Mech., 39, No. 9, 1081–1083 (2003).
A. N. Guz, “On some nonclassical problems of fracture mechanics taking into account the stresses along cracks,” Int. Appl. Mech., 40, No. 8, 937–941 (2004).
A. N. Guz, “On two-scale model of fracture mesomechanics of composites with cracks under compression,” Int. Appl. Mech., 41, No. 5, 582–585 (2005).
A. N. Guz and M. Sh. Dyshel’, “Fracture and buckling of thin panels with edge crack in tension,” Theor. Appl. Fract. Mech., 37, No. 36, 57–60 (2001).
A. N. Guz, M. Sh. Dyshel’, and V. M. Nazarenko, “Fracture and stability of materials and structural members with crack: Approaches and results,” Int. Appl. Mech., 40, No. 12, 1323–1359 (2004).
M. Sh. Dyshel’, “Fracture of plates with an inclined edge crack under tension,” Int. Appl. Mech., 40, No. 5, 580–582 (2004).
M. Sh. Dyshel’, “Influence of buckling of a tension plate with an edge crack on fracture characteristics,” Int. Appl. Mech., 42, No. 5, 589–592 (2006).
M. Sh. Dyshel’, “Local buckling of extended pates containing cracks and crack-like defects, subject to the influence of geometrical parameters of the plates and the defects,” Int. Appl. Mech., 35, No. 12, 1272–1276 (1999).
Author information
Authors and Affiliations
Additional information
__________
Translated from Prikladnaya Mekhanika, Vol. 42, No. 11, pp. 121–125, November 2006.
Rights and permissions
About this article
Cite this article
Dyshel’, M.S. Stability and fracture of plates with two edge cracks under tension. Int Appl Mech 42, 1303–1306 (2006). https://doi.org/10.1007/s10778-006-0201-1
Received:
Issue Date:
DOI: https://doi.org/10.1007/s10778-006-0201-1