Abstract
The paper studies the stress-strain state of a deep cylindrical panel weakened by a hole and subjected to a tensile load at the outer boundary. A variational difference method is used. A numerical analysis is carried out for an orthotropic panel with low shear stiffness
Similar content being viewed by others
References
V. F. Godzula, “Applying the variational difference method to composite cylindrical shells with openings,” Prikl. Mekh., 25, No. 11, 110–113 (1989).
V. F. Godzula, A. N. Guz, and K. I. Shnerenko, “Problems of the statics of non-shallow anisotropic shells with holes,” Int. Appl. Mech., 24, No. 9, 851–858 (1988).
A. N. Guz, I. S. Chernyshenko, V. N. Chekhov et al., Theory of Thin Shells with Openings, Vol. 1 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kiev (1980).
K. I. Shnerenko, “Analysis of design methods for composite shells with holes,” Int. Appl. Mech., 17, No. 4, 328–334 (1981).
V. A. Maksimyuk and I. S. Chernyshenko, “Mixed functionals in the theory of nonlinearly elastic shells,” Int. Appl. Mech., 40, No. 11, 1226–1262 (2004).
K. I. Shnerenko and V. F. Godzula, “Stress distribution in a composite cylindrical shell with a large circular opening,” Int. Appl. Mech., 39, No. 11, 1323–1327 (2003).
E. A. Storozhuk and I. S. Chernyshenko, “Elastoplastic deformation of flexible cylindrical shells with two circular holes under axial tension,” Int. Appl. Mech., 41, No. 5, 506–511 (2005).
S. V. Zakora and Val. N. Chekhov, “Stress state of a transversely isotropic spherical shell with a rigid circular inclusion,” Int. Appl. Mech., 41, No. 12, 1384–1390 (2005).
S. V. Zakora, V. N. Chekhov, and K. I. Shnerenko, “Stress concentration around a circular hole in a transversely isotropic spherical shell,” Int. Appl. Mech., 40, No. 12, 1391–1397 (2004).
Author information
Authors and Affiliations
Additional information
__________
Translated from Prikladnaya Mekhanika, Vol. 42, No. 5, pp. 73–78, May 2006.
Rights and permissions
About this article
Cite this article
Shnerenko, K.I., Godzula, V.F. Stress state of a cylindrical composite panel weakened by a circular hole. Int Appl Mech 42, 555–559 (2006). https://doi.org/10.1007/s10778-006-0120-1
Received:
Issue Date:
DOI: https://doi.org/10.1007/s10778-006-0120-1