Abstract
A technique is proposed to solve a thermoplastic problem for rectangular plates of varying thickness with arbitrary boundary conditions at all edges. The technique is based on the hypothesis of rectilinear element, the theory of simple loading, and the method of complete systems
Similar content being viewed by others
REFERENCES
E. I. Bespalova, “Solving elastic problems by methods of complete systems,” Zh. Vych. Mat. Mat. Fiz., 29, No.9, 1346–1353 (1989).
Ya. M. Grigorenko and A. T. Vasilenko, “Some approaches to the solution of problems on thin shells with variable geometrical and mechanical parameters,” Int. Appl. Mech., 38, No.11, 1309–1341 (2002).
Ya. M. Grigorenko and A. T. Vasilenko, Theory of Shells of Varying Stiffness, Vol. 4 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kiev (1981).
V. G. Piskunov and A. O. Rasskazov, “Evolution of the theory of laminated plates and shells,” Int. Appl. Mech., 38, No.2, 135–167 (2002).
A. A. Samarskii and Yu. P. Popov, Difference Schemes in Gas Dynamics [in Russian], Nauka, Moscow (1975).
S. P. Timoshenko and S. Woinowsky-Krieger, Theory of Plates and Shells, McGraw-Hill, New York (1959).
Yu. N. Shevchenko and I. V. Prokhorenko, Theory of Elastoplastic Shells under Nonisothermal Loading, Vol. 3 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kiev (1981).
M. E. Babeshko, “Thermoelastoplastic state of flexible laminated shells under axisymmetric loading along various plane paths,” Int. Appl. Mech., 39, No.2, 177–184 (2003).
M. E. Babeshko and Yu. N. Shevchenko, “Thermoelastoplastic stress-strain state of laminated transversely isotropic shells under axisymmetric loading,” Int. Appl. Mech., 40, No.8, 908–915 (2004).
M. E. Babeshko and Yu. N. Shevchenko, “Thermoelastoplastic axisymmetric stress-strain state of laminated orthotropic shells,” Int. Appl. Mech., 40, No.12, 1378–1384 (2004).
E. I. Bespalova and A. B. Kitaigorodskii, “Deformation of piecewise-homogeneous plates,” Int. Appl. Mech., 39, No.2, 217–223 (2003).
Author information
Authors and Affiliations
Additional information
__________
Translated from Prikladnaya Mekhanika, Vol. 41, No. 10, pp. 53–63, October 2005.
Rights and permissions
About this article
Cite this article
Shevchenko, Y.N., Prokhorenko, I.V. Thermoelastoplastic Stress-Strain State of Rectangular Plates. Int Appl Mech 41, 1130–1137 (2005). https://doi.org/10.1007/s10778-006-0018-y
Received:
Issue Date:
DOI: https://doi.org/10.1007/s10778-006-0018-y