Abstract
Due to the limitation of hardware and software, the existing online monitoring system of distribution transformer has the defect of long response time. Therefore, the design of online monitoring system of distribution transformer based on cloud side end collaboration of Internet of Things is proposed. The online monitoring system of distribution transformer is designed based on the cloud side end collaborative concept of Internet of Things. The hardware unit is transformer data acquisition unit, microprocessor selection unit and wireless communication unit, and the software module is transformer data processing module, transformer monitoring and alarm module and communication protocol module. Through the design of hardware and software, the online monitoring system of transformer is realized. The reaction time of the design system is 0.98–1.44 s then the experimental results show that: compared with the existing system, the response time of the design system is shorter, which fully proves that the monitoring performance of the design system is better, and it is suitable for vigorously promoting and using.
Similar content being viewed by others
Data Availability
All data, models, and code generated or used during the study appear in the submitted article.
Change history
07 November 2022
This article has been retracted. Please see the Retraction Notice for more detail: https://doi.org/10.1007/s10776-022-00582-7
Abbreviations
- CPC:
-
Central pay commission
- ADC:
-
Analog to digital converter
- MCU:
-
Microcontroller unit
- DSP:
-
Digital signal processing
- AMD:
-
Advanced micro devices
- AVR:
-
Automatic voltage regulator
- PIC:
-
Peripheral interface controllers
- ROM:
-
Read only memory
- RAM:
-
Random access memory
- EEPROM:
-
Electrically erasable programmable read-only memory
- PWM:
-
Pulse width modulation
- SPI:
-
Serial peripheral interface
- CAN:
-
Controller area network
- LCD:
-
Liquid–crystal display
- GSM:
-
Global System for Mobile Communications
- BCD:
-
Binary-coded decimal
- GPS:
-
Global positioning system
References
E. T. Tan and Z. A. Halim, Health care monitoring system and analytics based on Internet of Things framework, IETE Journal of Research, Vol. 65, No. 2, pp. 1–8, 2018.
J. Moon, S. Kum and S. Lee, A heterogeneous IoT data analysis framework with collaboration of edge-cloud computing: focusing on Indoor PM10 and PM2.5 Status prediction, Sensors (Basel, Switzerland), Vol. 19, No. 14, pp. 3038–3038, 2019.
L. W. Chen, T. P. Chen, H. M. Chen, et al., Crowdsourced children monitoring and finding with holding up detection based on Internet-of-Things technologies, IEEE Sensors Journal, Vol. 19, No. 24, pp. 12407–12417, 2019.
C. Zhang, X. Wu, W. Yan, et al., Attribute-aware graph recurrent networks for scholarly friend recommendation based on internet of scholars in scholarly big data, IEEE Transactions on Industrial Informatics, Vol. 16, No. 4, pp. 2707–2715, 2020.
A. Park, Cloud-based middleware for self-adaptive IoT-collaboration services, Sensors, Vol. 19, No. 20, pp. 4559–4559, 2019.
Y. P. Tsang, K. L. Choy, C. H. Wu, et al., An Internet of Things (IoT)-based risk monitoring system for managing cold supply chain risks, Industrial Management & Data Systems, Vol. 118, No. 7, pp. 1432–1462, 2018.
G. Lydia, H. Bruno, M. A. Irene, et al., Chinmo prevents transformer alternative splicing to maintain male sex identity, Plos Genetics, Vol. 14, No. 2, pp. 100–107, 2018.
E. Geuverink, E. C. Verhulst, M. V. Leussen, et al., Maternal provision of non-sex-specific transformer messenger RNA in sex determination of the wasp Asobara tabida, Insect Molecular Biology, Vol. 27, No. 1, pp. 99–109, 2018.
A. Celesti, O. Amft and M. Villari, Guest editorial special section on cloud computing, edge computing, internet of things, and big data analytics applications for healthcare industry 4.0, IEEE Transactions on Industrial Informatics, Vol. 15, No. 1, pp. 454–456, 2019.
M. Richter, E. M. Habermann, E. Siebecke, et al., A systematic screening of salt hydrates as materials for a thermochemical heat transformer, Thermochimica Acta, Vol. 12, No. 25, pp. 59–64, 2018.
M. V. Khan, M. Ishtikhar, et al., Biophysical insight reveals tannic acid as amyloid inducer and conformation transformer from amorphous to amyloid aggregates in Concanavalin A (ConA), Journal of Biomolecular Structure & Dynamics, Vol. 27, No. 1, pp. 1261–1273, 2018.
H. C. Chen, Collaboration loT-based RBAC with trust evaluation algorithm model for massive IoT integrated application, Mobile Networks & Applications, Vol. 24, No. 3, pp. 839–852, 2019.
L. H. Sathler and A. D. Conti, Single-phase distribution transformer modeling for narrowband power line communications, IEEE Transactions on Power Delivery, Vol. 35, No. 2, pp. 674–683, 2020.
M. Farhan, S. Jabbar, M. Aslam, et al., A real-time data mining approach for interaction analytics assessment: IoT based student interaction framework, International Journal of Parallel Programming, Vol. 46, No. 5, pp. 886–903, 2018.
J. Gan, X. Wang, J. Zhou, et al., Intelligent Monitoring Network Construction based on the utilization of the Internet of things (IoT) in the Metallurgical Coking Process, Open Physics, Vol. 16, No. 1, pp. 656–662, 2018.
J. Subramani, A. Maria, M. K. Priyan, M. Gunasekaran, C. Naveen, R. Varatharajan and H. Ching-Hsien, An efficient anonymous mutual authentication technique for providing secure communication in mobile cloud computing for smart city applications, Sustainable Cities and Society, Vol. 49, pp. 101522, 2019.
M. Abdel-Basset, G. Manogaran and M. Mohamed, Internet of Things (IoT) and its impact on supply chain: a framework for building smart, secure and efficient systems, Future Generation Computer Systems, Vol. 86, pp. 614–628, 2018.
B. Maram, J. M. Gnanasekar, G. Manogaran and M. Balaanand, Intelligent security algorithm for UNICODE data privacy and security in IOT, Service Oriented Computing and Applications, Vol. 13, No. 1, pp. 3–15, 2018.
G. Manogaran, M. Alazab, V. Saravanan, B. S. Rawal, P. M. Shakeel, R. Sundarasekar and C. E. Montenegro-Marin, Machine learning assisted information management scheme in service concentrated IoT, IEEE Transactions on Industrial Informatics, Vol. 17, No. 4, pp. 2871–2879, 2021.
B. Muthu, C. B. Sivaparthipan, G. Manogaran, et al., IOT based wearable sensor for diseases prediction and symptom analysis in healthcare sector, Peer-to-Peer Networking and. Applications, Vol. 13, pp. 2123–2134, 2020.
D. Shin, S. Jeong and J. Kim, Quantified design guidelines of compact transformer -less active EMI filter for performance, IEEE Transactions on Power Electronics, Vol. 33, No. 8, pp. 6723–6737, 2018.
M. C. Kaya, M. S. Nikoo, M. L. Schwartz, et al., Internet of measurement things architecture: proof of concept with scope of accreditation, Sensors, Vol. 20, No. 2, pp. 503–503, 2020.
S. Rao, Y. Li, R. Ramakrishnan, et al., BEHRT-HF: an interpretable transformer-based, deep learning model for prediction of incident heart failure, European Heart Journal, Vol. 41, No. 2, pp. 33–41, 2020.
R. A. Lopes, P. Magalhães, J. P. Gouveia, et al., A case study on the impact of nearly Zero-Energy Buildings on distribution transformer aging, Energy, Vol. 157, No. 15, pp. 669–678, 2018.
K. A. Meerja, P. V. Naidu and S. R. K. Kalva, Price versus performance of big data analysis for cloud based internet of things networks, Mobile Networks & Applications, Vol. 24, No. 3, pp. 1078–1094, 2019.
K. A. Hosseini, M. Hajiaghapour-Moghimi, E. Hajipour, et al., Distribution transformer relocation problem: an integer programming solution, IET Generation, Transmission and Distribution, Vol. 15, No. 1, pp. 108–120, 2021.
A. Kumari, S. Tanwar, S. Tyagi, N. Kumar, M. Maasberg and K. K. R. Choo, Multimedia big data computing and Internet of Things applications: a taxonomy and process model, Journal of Network and Computer Applications, Vol. 124, pp. 169–195, 2018.
C. Thota, G. Manogaran, D. Lopez and R. Sundarasekar, Architecture for Big Data Storage in Different Cloud Deployment Models. Research Anthology on Architectures, Frameworks, and Integration Strategies for Distributed and Cloud Computing, pp. 178–208, 2021.
Acknowledgements
This paper were supported by the following projects. Subject: online monitoring technology and application of low voltage distribution equipment based on cloud collaboration of Internet of things. KJ20-1-27, science and technology project of State Grid Tianjin electric power company.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Zu, G., Si, W., Yao, Y. et al. RETRACTED ARTICLE: Design of Online Monitoring System for Distribution Transformer Based on Cloud Side End Collaboration of Internet of Things. Int J Wireless Inf Networks 28, 276–286 (2021). https://doi.org/10.1007/s10776-021-00521-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10776-021-00521-y