Skip to main content

Advertisement

SpringerLink
Log in

Low-Power Reconfigurable Miniature Sensor Nodes for Condition Monitoring

  • Published:
International Journal of Parallel Programming Aims and scope Submit manuscript

Abstract

Wireless sensor networks (WSNs) are being deployed at an escalating rate for various application fields. The ever growing number of application areas requires a diverse set of algorithms with disparate processing needs. WSNs also need to adapt to prevailing energy conditions and processing requirements. The preceding reasons rule out the use of a single fixed design. Instead, a general purpose design that can rapidly be adapted to different conditions and requirements is desired. In lieu of the traditional inflexible wireless sensor node consisting of a separate micro-controller, radio transceiver, sensor array and energy storage, we propose a unified rapidly reconfigurable miniature sensor node, implemented with a transport triggered architecture processor on a low-power Flash FPGA. To our knowledge, this is the first study of its kind. The proposed approach does not solely concentrate on energy efficiency but a high emphasis is also put on the ease of development perspective. Power consumption and silicon area usage comparison based on solutions implemented using our novel rapid design approach for wireless sensor nodes are performed. The comparison is performed between 16-bit fixed point, 16-bit floating point and 32-bit floating point implementations. The implemented processors and algorithms are intended for rolling bearing condition monitoring, but can be fully extended for other applications as well.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4

Similar content being viewed by others

References

  1. Hempstead, M., Lyons, M.J., Brooks, D., Gu-Yeon, W.: Survey of hardware systems for wireless sensor networks. J. Low Power Electron. 4(1), 11–20 (2008)

    Article  Google Scholar 

  2. Project: Tmote Sky. [Online]. http://www.snm.ethz.ch/Projects/TmoteSky

  3. MICAz wireless measurement system. MEMSIC Inc., Tech. Rep

  4. Raju, M., Grazier, M.: Ultra low power meets energy harvesting. Texas instruments, Tech. Rep. [Online]. http://www.ti.com/lit/wp/slyy018a/slyy018a.pdf (2010)

  5. Paradiso, J.A., Starner, T.: Energy scavenging for mobile and wireless electronics. IEEE Pervasive Comput. 4(1), 18–27 (2005)

    Article  Google Scholar 

  6. Najafi, K.: Micro energy harvesters—an alternative source of renewable energy. [Online]. http://www.azonano.com/article.aspx?ArticleID=2613 (2010)

  7. Polastre, J., Szewczyk, R., Sharp, C., Culler, D.: The mote revolution: low power wireless sensor network devices. In: Hot Chips 16: A Symposium on High Performance Chips (2004)

  8. Chen, Y., Gnawali, O., Kazandjieva, M., Levis, P., Regehr, J.: Surviving sensor network software faults. In: Proceedings of the ACM SIGOPS 22nd Symposium on Operating Systems Principles. Ser. SOSP ’09, pp. 235–246 (2009)

  9. Wan, V., Young, E.: Power management in an RF5 audio streaming application using DSP/BIOS. Texas instruments, Tech. Rep. (2005)

  10. Kansal, A., Hsu, J., Zahedi, S., Srivastava M.B.: Power management in energy harvesting sensor networks. ACM Trans. Embed. Comput. Syst. 6 Sept 2007

  11. Jiang, X., Polastre, J., Culler, D.: Perpetual environmentally powered sensor networks. In: Fourth International Symposium on Information Processing in Sensor Networks, 2005. IPSN 2005, pp. 463–468, April 2005

  12. Simjee, F., Chou, P.H.: Everlast: long-life, supercapacitor-operated wireless sensor node. In: Proceedings of the 2006 International Symposium on Low Power Electronics and Design, 2006. ISLPED’06, pp. 197–202, Oct 2006

  13. Raghunathan, V., Ganeriwal, S., Srivastava, M.: Emerging techniques for long lived wireless sensor networks. IEEE Commun. Mag. 44(4), 108–114 (2006)

    Article  Google Scholar 

  14. Alippi, C., Anastasi, G., Di Francesco, M., Roveri, M.: Energy management in wireless sensor networks with energy-hungry sensors. IEEE Instrument. Meas. Mag. 12(2), 16–23 (2009)

    Article  Google Scholar 

  15. Chou, J., Petrovic, D., Ramachandran, K.: A distributed and adaptive signal processing approach to reducing energy consumption in sensor networks. In: INFOCOM 2003. Twenty-Second Annual Joint Conference of the IEEE Computer and Communications. IEEE Societies, 2, vol. 2, pp. 1054–1062 (2003)

  16. Heo, J., Hong, J., Cho, Y.: EARQ: energy aware routing for real-time and reliable communication in wireless industrial sensor networks. IEEE Trans. Indus. Inf. 5(1), 3–11 (2009)

    Article  Google Scholar 

  17. Heinzelman, W.R., Chandrakasan, A., Balakrishnan, H.: Energy-efficient communication protocol for wireless microsensor networks. In: Proceedings of the 33rd Annual Hawaii International Conference on System Sciences (2000)

  18. Li, F., Ye, L., Zhang, G., Meng, G.: Bearing fault detection using higher-order statistics based ARMA model. Key engineering materials, vol. Damage assessment of structures VII, pp. 271–276, Sept 2007

  19. Soltani Bozchalooi, I., Liang, M.: Parameter-free bearing fault detection based on maximum likelihood estimation and differentiation. Meas. Sci. Technol. 20(6), 065102 (2009)

    Article  Google Scholar 

  20. Esko, O., Jääskelainen, P., Huerta, P., de la Lama, C.S., Takala, J., Martinez, J.I.: Customized exposed datapath soft-core design flow with compiler support. In: 2010 international conference on field programmable logic and applications (FPL), pp. 217–222 (2010)

  21. Yifan, H., Dongrui, S., Mesman, B., Corporaal, H.: MOVE-Pro: a low power and high code density TTA architecture. In: 2011 International Conference on Embedded Computer Systems (SAMOS), pp. 294–301 (2011)

  22. Pitkänen, T., Mäkinen, R., Heikkinen, J., Partanen, T., Takala, J.: Low-power, high-performance TTA processor for 1,024-point dast fourier transform. In: Embedded Computer Systems: Architectures, Modeling, and Simulation: Proceedings of the 6th International Workshop SAMOS VI, LNCS 4017, pp. 227–236 (2006)

  23. Microsemo SoC Products Group. Flash FPGAs in the value-based market. MicroSemi SoC Products Group, Tech. Rep. [Online]. http://www.actel.com/documents/ValueFPGA_WP.pdf (2005)

  24. MicroSemi SoC Products Group. Igloo low-power Flash FPGAs with Flash*Freeze technology. [Online]. http://www.actel.com/documents/IGLOO_DS.pdf (2011)

  25. Tiwari, V., Malik, S., Wolfe, A., Lee, M.T.-C.: Instruction level power analysis and optimization of software. In: Proceedings of the Ninth International Conference on VLSI Design, 1996, pp. 326–328 (1996)

  26. Rintaluoma, T., Silvén, O.: Energy efficiency of mobile video decoding. In: International Conference on Embedded Computer Systems: Architectures, Modeling and Simulation, IC-SAMOS 2007, pp. 103–109 (2007)

  27. Janhunen, J., Pitkänen, T., Silven, O., Juntti, M.: Fixed- and floating-point processor comparison for MIMO-OFDM detector. IEEE J. Sel. Top. Signal Process. 5(8), 1588–1598 (2011)

    Article  Google Scholar 

  28. Lomont, C.: Fast inverse square root. Tech. Rep., (2003)

  29. Bishop, D.: Floating-point package user’s guide. EDA Industry Working Groups, Tech. Rep. (2008)

  30. Nyländen, T., Boutellier, J., Nikunen, K., Hannuksela, J., Silven, O.: Reconfigurable miniature sensor nodes for condition monitoring. In: Proceedings of the International Conference on Embedded Computer Systems: Architectures, Modeling, and Simulation (SAMOS XII) (2012)

  31. Ghazi, A., Boutellier, J., Hannuksela, J., Silvén, O., Janhunen, J.: Low-complexity sdr implementation of IEEE 802.15.4 (zigbee) baseband transceiver. In: Proceedings on Application Specific Processor, SDR’13 WInnComm (2013)

  32. Mais, J.: Spectrum analysis: the key features of analyzing spectra. [Online]. http://www.scribd.com/doc/30396415/Spectrum-Analysis (2002)

  33. Wang, Q., Zhang, Y., Sun, N.X., McDaniel, J.G., Wang, M.L.: High power density energy harvester with high permeability magnetic material embedded in a rotating wheel. In: SPIE Proceedings, 8347, (2012)

  34. Joyce, B.S.: Development of an electromagnetic energy harvester for monitoring wind turbine blades. Master’s thesis, Virginia Polytechnic Institute and State University (2011)

  35. Wang, Y.-J., Shen, S.-C., Chen C.-D.: Wideband Electromagnetic Energy Harvesting from a Rotating Wheel. Small-Scale Energy Harvesting. 10 (2012)

  36. Li, B., Chow, M.-Y., Tipsuwan, Y., Hung, J.C.: Neural-network-based motor rolling bearing fault diagnosis. IEEE Trans. Ind. Electron. 47(5), 1060–1069 (2000)

    Article  Google Scholar 

  37. Pullin, A.: An energy audit of automotive vibration sources for energy harvesting and applied computation in wireless sensor networks. University of California, Berkeley, Tech. Rep. [Online]. http://andrewpullin.org/pubs/pullin_masters_report_sp_2010.pdf (2010)

  38. Polastre, J., Szewczyk, R., Culler, D.: Telos: enabling ultra-low power wireless research. In: Fourth International Symposium on Information Processing in Sensor Networks, 2005. IPSN 2005, pp. 364–369, April 2005

  39. Bier, J.: Jeff Bier’s impulse response-a rising tide lifts all boats. [Online]. http://www.bdti.com/InsideDSP/2012/11/20/JeffBierImpulseResponse, Nov 2012

  40. Sudevalayam, S., Kulkarni, P.: Energy harvesting sensor nodes: survey and implications. IEEE Commun. Surv. Tutor. 13(3), 443–461 (2011)

    Article  Google Scholar 

Download references

Acknowledgments

This study was carried out in the InterSync project. The project is a part of the Finnish Metals and Engineering Competence Cluster (FIMECC) research program Energy and Life Cycle Cost Efficient Machines (EFFIMA). The project is also financially supported by the Finnish Funding Agency for Technology and Innovation (TEKES) and industrial companies. Their support is gratefully acknowledged. We would also like to thank VTT Technical Research Centre of Finland for co-operation and for providing the trial hardware for a complete mote solution.

Author information

Authors and Affiliations

  1. Department of Computer Science and Engineering, University of Oulu, Oulu, Finland

    Teemu Nyländen, Jani Boutellier, Jari Hannuksela & Olli Silvén

  2. Department of Electrical Engineering, University of Oulu, Oulu, Finland

    Karri Nikunen

Authors
  1. Teemu Nyländen
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Jani Boutellier
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Karri Nikunen
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Jari Hannuksela
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Olli Silvén
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Teemu Nyländen.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Nyländen, T., Boutellier, J., Nikunen, K. et al. Low-Power Reconfigurable Miniature Sensor Nodes for Condition Monitoring. Int J Parallel Prog 43, 3–23 (2015). https://doi.org/10.1007/s10766-013-0302-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10766-013-0302-5

Keywords

Search

Navigation