Heat and Moisture Transport and Storage Parameters of Bricks Affected by the Environment
- 65 Downloads
The effect of external environment on heat and moisture transport and storage properties of the traditional fired clay brick, sand–lime brick and highly perforated ceramic block commonly used in the Czech Republic and on their hygrothermal performance in building envelopes is analyzed by a combination of experimental and computational techniques. The experimental measurements of thermal, hygric and basic physical parameters are carried out in the reference state and after a 3-year exposure of the bricks to real climatic conditions of the city of Prague. The obtained results showed that after 3 years of weathering the porosity of the analyzed bricks increased up to five percentage points which led to an increase in liquid and gaseous moisture transport parameters and a decrease in thermal conductivity. Computational modeling of hygrothermal performance of building envelopes made of the studied bricks was done using both reference and weather-affected data. The simulated results indicated an improvement in the annual energy balances and a decrease in the time-of-wetness functions as a result of the use of data obtained after the 3-year exposure to the environment. The effects of weathering on both heat and moisture transport and storage parameters of the analyzed bricks and on their hygrothermal performance were found significant despite the occurrence of warm winters in the time period of 2012–2015 when the brick specimens were exposed to the environment.
KeywordsBricks Hygric properties Hygrothermal performance Thermal properties Weathering
This research has been supported by the Czech Science Foundation, under Project No. P105/12/G059.
- 9.A. Benedetti, M. Federica, R. Marcio, in 8th International Masonry Conference (Technical University of Dresden, Dresden, 2010), p. 1Google Scholar
- 13.G. Cultrone, E. Sebastian, O. Cazalla, M.J. De La Torre López, in Proceedings of the Second Mediterranean Clay Meeting (Aveiro, Portugal, 1998), p. 298Google Scholar
- 18.J. Kruis, T. Krejčí, M. Šejnoha, in High Performance Computing in Science and Engineering: Second International Conference, HPCSE 2015, ed. by T. Kozubek et al. (Springer, 2016), p. 50Google Scholar
- 20.ČSN EN 772-11, Methods of Test for Masonry Units—Part 11: Determination of Water Absorption of Aggregate Concrete, Manufactured Stone and Natural Stone Masonry Units due to Capillary Action and the Initial Rate of Water Absorption of Clay Masonry Units (Czech Office for Standards, Metrology and Testing, Prague, 2011)Google Scholar
- 22.EN ISO 12572, Hygrothermal Performance of Building Materials and Products. Determination of Water Vapour Transmission Properties (The European Committee for Standardization, Brussels, 2001)Google Scholar
- 26.ČSN 73 0540-2, Thermal Protection of Buildings—Part 2: Requirements (Czech Office for Standards, Metrology and Testing, Prague, 2011)Google Scholar
- 30.ISO/EIC 98-3:2008, Evaluation of Measurement Data e Guide to the Expression of Uncertainty in Measurements (Joint Committee for Guides in Metrology, France, 2008)Google Scholar
- 34.X.G. de Castro, S. Fernando, M.P.C. de Almeida, A. Jonas, in Advances in Ceramics—Characterization, Raw Materials, Processing, Properties, Degradation and Healing, ed. by C. Sikalidis (InTech, London, 2011), p. 301Google Scholar