Skip to main content
Log in

Dry Block Calibrator with Improved Temperature Field and Integrated Fixed-Point Cells

  • Published:
International Journal of Thermophysics Aims and scope Submit manuscript

Abstract

To reduce uncertainty of calibrations of contact thermometers using dry block calibrators, a concept was developed at Institute for Process Measurement and Sensor Technology of Technische Universität Ilmenau. This concept uses a multi-zone heating, heat flux sensors and a multiple fixed-point cell. The paper shows the concept and its validation on the basis of a dry block calibrator with a working temperature range of \(70\,^{\circ }\hbox {C}\) to \(430\,^{\circ }\hbox {C}\). The experimental results show a stability of \({\pm } 4\,\hbox {mK}\) for the reference temperature and axial temperature differences in the normalization block less than \({\pm }55\,\hbox {mK}\).

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. R. Friedrichs, G. Villacrés, E.C. Weiß, in Sensoren und Messsysteme 2014 - Beiträge der 17. ITG/GMA Fachtagung (VDE Verlag GmbH, Berlin Offenbach, 2014)

  2. M. Ballico, C. Freund, Int. J. Thermophys. 32, 2360 (2011). doi:10.1007/s10765-011-1125-5

    Article  ADS  Google Scholar 

  3. H.-G. Behnke, S. Friederici, S. Rudtsch, Int. J. Thermophys. 31, 1703 (2010). doi:10.1007/s10765-010-0824-7

    Article  ADS  Google Scholar 

  4. J. Nielsen, J. Domino, M.B. Nielsen, Int. J. Thermophys. 32, 1485 (2011). doi:10.1007/s10765-011-1003-1

    Article  ADS  Google Scholar 

  5. F. Bernhard, Handbuch der Technischen Temperaturmessung (Springer, Berlin, 2014)

    Book  Google Scholar 

  6. M. Hohmann, S. Marin, M. Schalles, G. Krapf, T. Fröhlich, Int. J. Thermophys. 36, 2085 (2015). doi:10.1007/s10765-015-1943-y

    Article  ADS  Google Scholar 

  7. S. Marin, M. Hohmann, M. Schalles, G. Krapf, T. Fröhlich, Tech. Mess. 82, 402 (2015)

    Article  Google Scholar 

  8. K. Fischer, C. Stoiber, A. Kyarad, H. Lengfellner, Appl. Phys. A Mater. 78, 323 (2004). doi:10.1007/s00339-003-2326-y

    Article  ADS  Google Scholar 

  9. A. Kyarad, Thermoelektrische und Photovoltaische Effekte in Metall-Halbleiter Multilagenstrukturen. Dissertation, Universität Regensburg (2007)

  10. T. Fröhlich, M. Hohmann, M. Schalles, J. Thermoelectr. 49 (2015)

  11. M. Hohmann, P. Breitkreutz, M. Schalles, T. Fröhlich, Shaping the future by engineering: 58th IWK, Ilmenau Scientific Colloquium, Technische Universität Ilmenau (2014)

  12. Fluke Corporation. 917x series metrology well technical guide (2005)

  13. Ametek. Jofra Reference Temperature Calibrator RTC-700 datasheet (2016)

  14. G. Krapf, M. Schalles, T. Fröhlich, Measurement 44, 385 (2011)

    Article  Google Scholar 

Download references

Acknowledgements

The authors would like to thank the German Federal Ministry of Education and Research (BMBF) for founding the project “TempKal” in the VIP-program.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Michael Hohmann.

Additional information

Selected Papers of the 13th International Symposium on Temperature, Humidity, Moisture and Thermal Measurements in Industry and Science.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Hohmann, M., Marin, S., Schalles, M. et al. Dry Block Calibrator with Improved Temperature Field and Integrated Fixed-Point Cells. Int J Thermophys 38, 17 (2017). https://doi.org/10.1007/s10765-016-2155-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s10765-016-2155-9

Keywords

Navigation