Abstract
An experimental setup for characterization of thermal imagers has been designed and constructed. The setup comprises a climatic chamber and a temperature-controlled flat blackbody target that allow testing of thermal imagers in the ambient temperature range from −13 °C to + 23 °C and at target temperatures from −15 °C to + 120 °C. The setup has been tested with a high quality thermal imager for scientific use and a mid-range thermal imager for industrial applications. The test results indicate that the setup allows monitoring the changes in indication of thermal imagers within the standard uncertainty limits of 0.5 °C.
Similar content being viewed by others
References
Chrzanowski K., Fischer J., Matyszkiel R.: Opt. Eng. 39, 9 (2000)
Chrzanowski K.: Appl. Opt. 35, 19 (1996)
J. Hartmann, J. Fischer, in Proceedings of SPIE, vol. 4360 (2001), p. 402
Saunders P.: Meas. Sci. Technol. 20, 2 (2009)
OIML R 141:2008, Procedure for Calibration and Verification of the Main Characteristics of Thermographic Instruments (Bureau International de Métrologie Légale, Sèvres, France, 2008)
Chrzanowski K., Matyszkiel R., Fischer J., Barela J.: Opt. Eng. 40, 6 (2001)
Saunders P., White D.R.: Metrologia 40, 4 (2003)
Bloembergen P.: Metrologia 40, 5 (2009)
R. Vendt, P. Jaanson, V. Vabson, M. Vilbaste, T. Kubarsepp, M. Noorma, in Proceedings of SPIE, vol. 7299, p. 729902 (2009)
R. Vendt, M. Kuusik, T. Kübarsepp, in Proceedings of TEMPMEKO 2004, 9th International Symposium on Temperature and Thermal Measurements in Industry and Science, ed. by D. Zvidić, L.G. Bermanec, T. Veliki, T. Stašić (FSB/LPM, Zagreb, Croatia, 2004), pp. 941–944
FLIR Systems AB: ThermaCAM SC3000 Operators Manual. FLIR Systems AB, Danderyd, Sweden (1999)
FLIR Systems AB: Thermal Imaging Cameras for Building Inspection. FLIR Systems AB, Danderyd, Sweden (2010)
ISO: Guide to the Expression of Uncertainty in Measurement. International Organisation for Standardisation, Genéve (1995)
F. Liebmann, in Proceedings of SPIE, vol. 6939 (2008), p. 693906
Horwitz J.: Appl. Opt. 38, 19 (1999)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Vendt, R., Juurma, M., Jaanson, P. et al. Effects of Environmental Conditions on the Performance of Thermal Imagers. Int J Thermophys 32, 248–257 (2011). https://doi.org/10.1007/s10765-010-0896-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10765-010-0896-4