Abstract
In 2006, the CIPM clarified the definition of the kelvin by specifying the isotopic composition of the water to be used in the realization of the triple point. At the same time, the Consultative Committee for Thermometry gave recommended values for the isotopic correction constants to be used for water departing from the specified composition. However, the uncertainties in the values for the correction constants were undesirably large due to unresolved differences between the data sets from which the values were determined. This paper derives improved values of the constants by considering additional data from isotopic fractionation measurements and the heats of fusion and freezing points of the relevant water isotopologues. Values of the corrections determined from the expanded data are A D = 671(10) μK, A 18O = 603(3) μK, and A 17O = 60(1) μK. A typical correction made with these values lies just within the expanded uncertainty (k = 2) of the corrections made with the older values, but has about half the uncertainty.
Similar content being viewed by others
References
Bureau International des Poids et Mesures, The International System of Units, 8th edn., Section 2.1.1.5 (BIPM, Paris, 2005)
D.R. White, T.D. Dransfield, G.F. Strouse, W.L. Tew, R.L. Rusby, J. Gray, in Temperature: Its Measurement and Control in Science and Industry, vol. 7, ed. by D.C. Ripple (AIP, New York, 2003), pp. 221–226
M. Stock, S. Solve, D. del Campo, V. Chimenti, E. Méndez-Lango, H. Liedberg, P.P.M. Steur, P. Marcarino, R. Dematteis, E. Filipe, I. Lobo, K.H. Kang, K.S. Gam, Y.-G. Kim, E. Renaot, G. Bonnier, M. Valin, R. White, T.D. Dransfield, Y. Duan, Y. Xiaoke, G. Strouse, M. Ballico, D. Sukkar, M. Arai, A. Mans, M. de Groot, O. Kerkhof, R. Rusby, J. Gray, D. Head, K. Hill, E. Tegeler, U. Noatsch, S. Ďuriš, H.Y. Kho, S. Ugur, A. Pokhodun, S.F. Gerasimov, in Final Report on CCT-K7 Key Comparison of Water Triple Point Cells (BIPM, Paris, 2006)
Bureau International des Poids et Mesures, in Mise en Pratique for the Definition of the Kelvin (BIPM, Paris, 2006), pp. 1–2. http://www.bipm.org/en/committees/cc/cct/publications_cc.html
Kiyosawa K.: J. Solut. Chem. 20, 583 (1991)
LaMer V.K., Baker W.N.: J. Am. Chem. Soc. 56, 2641 (1934)
Kiyosawa K.: J. Solut. Chem. 33, 323 (2004)
Tew W.L., White D.R.: J. Solut. Chem. 34, 1191 (2005)
Nguyen M.K., Ballico M.: Int. J. Thermophys. 29, 1761 (2008)
Lehmann M., Siegenthaler U.: J. Glaciol. 37, 23 (1991)
Young E.D., Galy A., Nagahara H.: Geochim. Cosmochim. Acta 66, 1095 (2002)
A. Prince, in Alloy Phase Equilibria (Elsevier, Amsterdam, 1966)
Seltz H.: J. Am. Chem. Soc. 56, 307 (1934)
Feistel R., Wagner W.: J. Phys Chem. Ref. Data 35, 1021 (2006)
Nagano Y., Miyazaki Y., Matsuo T., Suga H.: J. Phys. Chem. 97, 6897 (1993)
Kestin J., Sengers J.V., Kamga-Parsi B., Sengers J.M.H.: J. Phys. Chem. Ref. Data 13, 601 (1984)
Haida O., Suga H., Seki S.: J. Glaciol. 22, 155 (1979)
Majoube M.: J. Chem. Phys. Phyisico-Chem. Biol. 68, 1423 (1971)
Merlivat L., Nief G.: Tellus 19, 122 (1967)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
White, D.R., Tew, W.L. Improved Estimates of the Isotopic Correction Constants for the Triple Point of Water. Int J Thermophys 31, 1644–1653 (2010). https://doi.org/10.1007/s10765-010-0819-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10765-010-0819-4