Skip to main content
Log in

An Unique SPICE Model of Photodiode with Slowly Changeable Carriers’ Velocities

  • Published:
Journal of Infrared, Millimeter, and Terahertz Waves Aims and scope Submit manuscript

    We’re sorry, something doesn't seem to be working properly.

    Please try refreshing the page. If that doesn't work, please contact support so we can address the problem.


This paper deals with a relatively new SPICE model of a P-i-N photodiode. The model includes a change of velocities of electrons and holes, due to the voltage drop on the edges of the photodiode, which depends on the time form of input excitation. We have derived the model of the P-i-N photodiode for digital input excitation i.e. for Heaviside’s square wave time excitation. The model is incorporated in SPICE program and simulated with it. The model and the limitations of the model itself are observed. The output results are compared with the similar ones. It is suggested when it is practical to use the model, and determined the photodiode working domain regime when the model gives accurate results.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others


  1. W. Chen, S. Liu, IEEE Journal of Quantum Electronics, vol. 32, no. 12, pp. 2105, (1996)

    Article  Google Scholar 

  2. J. Jou, C. Liu, C. Hsiao, H. Lin and Hsiu-Chih Lee, IEEE Photonic Technology Letters, vol. 14, no. 4, pp. 525, (2002)

    Article  Google Scholar 

  3. Y. Batawy, J. Deen, Journal of Lightwave Technology, vol. 23, no. 1, pp. 423, (2005)

    Article  Google Scholar 

  4. Y. Batawy, J. Deen, and N. Das, Journal of Lightwave Technology, vol. 21, no. 9, pp. 2031, (2003)

    Article  Google Scholar 

  5. Y. Batawy, J. Deen, IEEE Transaction on Electron Devices, vol. 52, no. 3, pp. 325, (2005)

    Article  Google Scholar 

  6. M. Lu, J. Deng, C. Juang, M. Jou, and B. Lee, IEEE Journal of Quantum Electronics, vol. 31, no. 8, pp. 1418, (1995)

    Article  Google Scholar 

  7. G. Rossi, R. Paoletti, and M. Meliga, IEEE/OSA Journal of Lightwave Technology, vol. 16, no. 8, pp. 1509, (1998)

    Article  Google Scholar 

  8. B. Tsou, D. Pulfrey, IEEE Journal of Quantum Electronics, vol. 33, no. 2, pp. 246, (1997)

    Article  Google Scholar 

  9. C. Chang, H. Fetterman, Solid-state electronics, vol. 29 no. 12, pp. 1295, (1986)

    Article  Google Scholar 

  10. S. Malyshev, A. Chizh, Journal of Selected Topics in Quantum Electronics, vol. 10, no. 4, pp. 679, (2004)

    Article  Google Scholar 

  11. P. Matavulj, D. Gvozdić, J. Radunović, Journal of Lightwave Technology, vol. 15, no. 12, pp. 2270, (1997)

    Article  Google Scholar 

  12. M. Lazović, P. Matavulj and J. Radunović, Microwave and Optical Technology Letters, vol. 41, no. 6, pp. 468, (2004)

    Article  Google Scholar 

Download references


This work was supported by the Serbian Ministry of Science and Technological Development with contract No. 16001A.

Author information

Authors and Affiliations


Corresponding author

Correspondence to Petar S. Matavulj.



The diffusion current is obtained using the continuity equation for holes in N region in the case of Dirac’s time input excitation:

$$ \frac{{\partial {p_n}}}{{\partial t}} - {D_p}\frac{{{\partial^2}{p_n}}}{{\partial {x^2}}} + \frac{{{p_n} - {p_{{n0}}}}}{{{\tau_p}}} = \alpha I\exp \left( { - \alpha x} \right)\delta \left( {t - {t_0}} \right). $$

In above equation p n is the holes’ concentration in N region, D p is diffusion constant for holes, τ p is the holes’ life time in N region, p n0 is the thermal-equilibrium hole’s concentration in N region. Here we proposed border conditions in steady state as \( {p_n}\left( {x = {W_n} \sim d} \right) = 0 \) and \( {p_n}\left( {x = \propto } \right) = {p_{{no}}} \). This approximation is involved with the aim to simplify solving the case. Solution of the Eq. A.1 is

$$ {p_n}\left( {x,t} \right) = {p_{{n0}}} - {p_{{n0}}}\exp \left( {\frac{{d - x}}{{{L_p}}}} \right) + \alpha I\exp \left( { - \alpha x} \right)\exp \left( { - \gamma \left( {t - {t_o}} \right)} \right)h\left( {t - {t_0}} \right), $$

where γ=(1-α 2 L p 2 )/τ p , and x>d. The holes’ diffusion current in N region can be obtained as

$$ {I_{{pdif}}} = - qS{D_p}{\left. {\frac{{\partial {p_n}}}{{\partial x}}} \right|_{{x = d}}}. $$

Considering that the last member in Eq. A.2 has the biggest value, we exclude the rest members and obtain

$$ {I_{{pdif}}} = qS{D_p}{\alpha^2}I\exp \left( { - \alpha d} \right)\exp \left( { - \gamma \left( {t - {t_0}} \right)} \right). $$

Using the Eq. A.4 and parameter τ instead of (t-t 0 ), we obtain I pdif for the case of Heaviside’s time input excitation as

$$ {I_{{pdif}}} = qS{D_p}{\alpha^2}\left( {{\rm int} 01} \right)\exp \left( { - \alpha d} \right)\int\limits_{{ - \infty }}^{\infty } {h(t - {t_1}} - \tau )\exp \left( { - \gamma \tau } \right)d\tau, $$

where int 01 is the intensity of Heaviside’s function. Solving the above integral we get Eq. 12.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Matavulj, P.S., Lazović, M.V. & Radunović, J.B. An Unique SPICE Model of Photodiode with Slowly Changeable Carriers’ Velocities. J Infrared Milli Terahz Waves 32, 64–78 (2011).

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: