Formulas for calculating the change of vibration of the support of a turbine-generator set with an attached dynamic vibration damper are given in the frequency band of its efficient operation. In calculation with the relative damping ratio of the dynamic vibration damper, the value of which is determined by the proposed method, taking account of the changes of the dynamic properties of a mechanical system, the best approximation to the measured values was obtained in conducting bench trials.
Similar content being viewed by others
References
A. G. Kostyuk, Dynamics and Strength of Turbodynamos [in Russian], Izd. MÉI, Moscow (2007).
V. N. Chelomeya (ed.), Vibrations in the Technological Process: Reference Manual [in Russian], Mashinostroenie, Moscow (2001).
V. M. Pan’kin, “Selection of the mass of a dynamic vibration suppressor for oscillations of the supports of turbine-generator sets,” Élektr. Stantsii, No. 10, 38 – 41 (2016).
E. S. Trunin, “Dynamic absorbents of resonance vibrations of supports of turbine-generator sets,” Élektr. Stantsii, No. 10, 74 – 76 (1972).
V. M. Pan’kin, “A dynamic low-frequency vibration suppressor for supports of turbine-generator sets,” Élektr. Stantsii, No. 10, 53 – 56 (2014).
A. S. Gol’din, Vibrations of Rotor Machines [in Russian], Mashinostroenie, Moscow (2000).
Regulations for Technical Operation of Power Plants and Power Grids of the Russian Federation [in Russian], Izd. DEAN, St. Petersburg (2012).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Élektricheskie Stantsii, No. 3, March 2020, pp. 39 – 42.
Rights and permissions
About this article
Cite this article
Pan’kin, V.M. Influence of Damping on the Calculation Results of the Vibration Parameters of the Support of a Turbine-Generator Set with an Attached Dynamic Vibration Damper. Power Technol Eng 54, 394–397 (2020). https://doi.org/10.1007/s10749-020-01221-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10749-020-01221-y