Atechnique of experimental investigation and description of a test bench for determining the coefficient of reflection of waves produced by a rock-fill inclined structure is set forth. Results of experimental investigations conducted on the basis of physical simulation are presented.
Similar content being viewed by others
References
Code of Rules of SP 13330.2012. Loads and Impacts on Hydraulic Structures (wave-, wind-, and ship-induced actions). Updated Edition of Building Code 2.06.0–82* [in Russian], Ministry of Regional Development of the Russian Federation (2012).
Complex of Coastal and Marine Infrastructure at the Gelendzhik Seaport: Design Documentation [in Russian], AO LenmorNIIproekt, St. Petersburg (2017).
Physical and Numerical Simulation of Hydrodynamic and Lithodynamic Processes for Assuring the Development of Design Documentation in the Project, Development of Design and Working Documentation and Implementation of Engineering Research in the Project, Complex of Oil Refining and Petrochemical Plants. ZAO Eastern Petrochemical Company. Stage 2: Mathematical and Physical Simulation of the Interaction of Waves with Harbor Structures [in Russian], Legal Report to NIR, Marine Research Laboratory, Moscow State University of Civil Engineering (2015).
Report on Scientific Research and Experimental Design Work for Experimental Investigation of the Properties of Construction Materials and Construction for the Purpose of Determining Standardized Parameters and Realization of Structural Designs that Conform to the Safety Requirements of Buildings and Structures in the Topic, Investigations of the Stability of the Support Elements of Inclined Wave-suppressor Structures [in Russian], AO TsNIIS, Sochi (2016).
K. N. Makarov and N. K. Makarov, Simulation of protective structures in the harbor of Mzymtinsk in the Adler district of the city of Sochi, Vest. Moscow State University of Civil Engineering, No. 1, 50 – 54 (2010).
K. N. Makarov and A. G. Chebotarev, “Wave-protection rock-fill structures in the deep-water parts of harbor seawalls,” Inzh.- Stroit. Zh., No. 3, 67 – 78 (2015).
K. N. Makarov, R.M. Tlyavlin, and A. G. Chebotarev, “Stability of wave-protection rock-fill in the deep-water sections of harbor seawalls from the data of field and experimental investigations,” Gidrotekhnika, No. 2, 72 – 76 (2015).
K. N. Makarov, R. M. Tlyavlin, and A. G. Chebotarev, “Wavesuppressor rock-fill structures of harbor seawalls,” in: Certain Questions in the Design of Marine Hydraulic Structures [in Russian], RITs FGBOU VO SGU, Sochi (2015), pp. 5 – 7.
I. G. Kantarzhi and N. V. Shun’ko, “Experimental investigations of protective rock-fill structures of the slopes of harbor structures,” Gidrotekh. Stroit., No. 10, 10 – 18 (2016).
P. J. Beresford, HR Wave Maker. Wave Generation Control Program. Software Manual, HR Report IUT 453 (Issue 5) (August 2003).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Gidrotekhnicheskoe Stroitel’stvo, No. 11, November 2018, pp. 41 – 44.
Rights and permissions
About this article
Cite this article
Zuev, N.D., Shun’ko, A.S. & Shun’ko, N.V. Investigation of Coefficient of Reflection of Waves Produced by a Rock-Fill Inclined Bank Protection Structure. Power Technol Eng 53, 29–32 (2019). https://doi.org/10.1007/s10749-019-01029-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10749-019-01029-5