In designing mine spillways without a profiled water drain surface that operates in the absence of contact of the water jet with the concrete within a funnel and transitional section, the problem arises of calculating the trajectory of an annular jet, taking into account the vacuum in the space under the jet. A hydraulic method for such calculation using a virtual jet is described. Calculated dependences are given. The results of calculations are compared to test results, confirming the operability of the proposed method.
Similar content being viewed by others
References
L. I. Turchak, Foundations of Numerical Methods: Textbook [in Russian], Nauka, Gl. red. fiz.-mat. lit., Moscow (1987).
I. M. Voronkov, Course in Theoretical Mechanics. 11 th ed. [in Russian], Nauka, Moscow (1964).
A. I. Glazov, “Parameters of a flat free-jet jet with a vacuum air cavity beneath it,” Stroit. Arkhit., No. 8, 91 – 94 (1963).
N. I. Roman’ko, “Calculation of a mine-type spillway,” Gidrotekh. Stroit., No. 4, 44 – 46 (1963).
W. E. Wagner, Morning-Glory Shaft Spillways: Determination of Pressure-Controlled Profiles, Proc. ASCE, 432-1 – 432-38 (1954).
A. I. Glazov, “Differential equation of the trajectory of a flat jet moving over a vacuum air cavity in the presence of excess pressure on the upper surface,” Internet-zh. Naukovedenie, 9(2), http://nauko-vedenie.ru/PDF/78TVN217.pdf (2017).
S. M. Slisskii, Hydraulics of Hydroelectric Power Plant Buildings [in Russian], Énergiya, Moscow (1970).
G. Yu. Stepanov, Hydrodynamic Theory of Air-Cushion Vehicles [in Russian], Mashgiz, Moscow (1963).
A. Rubel, “Computations of jet impingement on a flat surface,” AIAA J, 18(2), 168 – 175 (1980).
P. G. Kiselev, ed., Reference Manual of Hydraulic Calculations. 5 th ed. [in Russian], Énergiya, Moscow) (1974).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Gidrotekhnicheskoe Stroitel’stvo, No. 11, November 2017, pp. 20 – 29.
Rights and permissions
About this article
Cite this article
Glazov, A.I. Engineering Method for Calculating the Parameters of an Annular Jet with a Vacuum Air Cavity Beneath It. Power Technol Eng 52, 15–22 (2018). https://doi.org/10.1007/s10749-018-0904-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10749-018-0904-6