Solutions are proposed for enhancement of the in-service safety of hydraulicked ash-slag dumps with consideration of their hydrothermal regime. An assessment is given for the minimum dimensions of the settling basins and top surface of ash-slag dumps.
Similar content being viewed by others
References
E. N. Bellendir, D. A. Ivashintsov, D. V. Stefanishin, O. M. Finagenov, and S. G. Shul’man, Probabilistic Methods for Reliability Assessment of Earthen Water-Development Works [in Russian], Izd. VNIIG im. B. E. Vedeneeva, St. Petersburg (2003, 2004).
V. G. Panteleev and A. N. Frolov, “Classification of the thermal regime of hydraulicked structures in the winter-operating period,” Gidrotekh. Stroit., No. 1, 31 – 34 (1990).
A. N. Frolov and i. V. Zaitseva, “New procedures for solid-fuel combustion and problems with removal and storage of ash-slag wastes,” Izv. VNIIG im. B. E. Vedeneeva, 260, 86 – 97 (2010).
Recommendations for Analyses of Water Balance in Large Lakes and Reservoirs [in Russian], Gidrometeorizdat, Leningrad (1989).
V. G. Panteleev, V. A. Melent’ev, É. L. Dobkin et al., Ash-Slag Materials and Ash Dumps [in Russian], Énergiya, Moscow (1976).
V. A. Znamenskii, Hydrological Processes and Their Role in Water Quality [in Russian], Gidrometeoizdat, Leningrad (1981).
A. N. Frolov, “Effect of efficiency of water clarification in basins-settling tanks on selection of optimal HAR systems,” Izv. VNIIG im. B. E. Vedeneeva, 217, 60 – 65 (1989).
A. N. Frolov, “Size reduction of a settling basin to improve inservice safety of ash-slag dumps,” Izv. VNIIG im. B. E. Vedeneeva, 262, 91 – 99 (2011).
RF Pat. No. 101460 for Useful Prototype, A. N. Frolov and I. V. Zaitseva, “Hydraulicked structure,” Byull. Izobr., No. 2 (2011).
Author information
Authors and Affiliations
Additional information
Translated from Gidrotekhnicheskoe Stroitel’stvo, No. 10, October 2012, pp. 20 – 25.
Rights and permissions
About this article
Cite this article
Frolov, A.N. Refinement of procedures for analysis and construction of hydraulicked ash-slag dumps to improve their in-service safety. Power Technol Eng 46, 447–452 (2013). https://doi.org/10.1007/s10749-013-0376-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10749-013-0376-7