Abstract
Using cone valves, it is possible to supply both minimal and design water flow rates, which cannot always be achieved using other types of valves.
Similar content being viewed by others
References
A. T. Kaveshnikov and V. P. Kupriyanov, The Use of Cone Valves in Hydraulic Engineering [in Russian], Agropromizdat, Moscow (1992).
A. T. Kaveshnikov and Sh. K. Tazi, “Conjugation of head and tail water in free efflux from cone valves into the atmosphere,” Gidrotekh. Stroit., No. 7 (1997).
A. T. Kaveshnikov and M. Yu. Sivak, “Energy damping in tail water of spillways equipped with cone valves,” in: Nature Management and Rational Use of Natural Resources as Prerequisites of Socioeconomic Progress in Russia. Collected Works. Part 1 [in Russian], Moscow (2005).
M. Yu. Sivak, “Ecological state of the tail-water pool in a dam with cone valves,” in: Contemporary Global Environmental Problems. Proc. of the 6 th Sci. Conf. “Morality and Ecology” [in Russian], Izd. MGUP, Moscow (2004).
M. Yu. Sivak, “The effect of different types of energy dampers on the ecological state of tail-water pools,” in: Contemporary Global Environmental Problems. Proc. of the 7 th Sci. Conf. “Morality and Ecology” [in Russian], Izd. MGUP, Moscow (2004).
D. V. Shterenlikht, Hydraulics, Énergoatomizdat, Moscow (1992).
Author information
Authors and Affiliations
Additional information
__________
Translated from Gidrotekhnicheskoe Stroitel’stvo, No. 9, September 2006, pp. 23–26.
Rights and permissions
About this article
Cite this article
Kavehsnikov, A.T., Sivak, M.Y. Damping flow energy in the tail water of spillways with cone valves. Power Technol Eng 40, 333–336 (2006). https://doi.org/10.1007/s10749-006-0072-y
Issue Date:
DOI: https://doi.org/10.1007/s10749-006-0072-y